Sony Cyber-Shot DSC-W710 Instruction Manual

Digital Still Camera
Instruction Manual
DSC-W710
© 2013 Sony Corporation Printed in China
English
Learning more about the camera ("Cyber-shot User
Guide")
"Cyber-shot User Guide" is an on-line manual. Refer to it for in-depth
instructions on the many functions of the camera.
1 Access the Sony support page.
http://www.sony.net/SonyInfo/Support/
2 Select your country or region.
3 Search for the model name of your camera within the support page.
• Check the model name on the bottom of your camera.
Checking the supplied items
The number in parentheses indicates the number of pieces.
• Camera (1)
• Rechargeable battery pack NP-BN (1) (This rechargeable battery pack cannot be used
with Cyber-shot that are supplied with the NP-BN1 battery pack.)
• Dedicated USB cable (1) (Sony Corporation 1-834-331-)
• AC Adaptor AC-UB10/UB10B/UB10C/UB10D (1)
• Power cord (Mains lead) (1)
• Wrist strap (1)
• Instruction Manual (this manual) (1)
WARNING
To reduce fire or shock hazard, do not expose the unit to rain or moisture.
CAUTION
[ Battery pack
If the battery pack is mishandled, the battery pack can burst, cause a fire or even chemical burns.
Observe the following cautions.
• Do not disassemble.
• Do not crush and do not expose the battery pack to any shock or force such as hammering, dropping
or stepping on it.
• Do not short circuit and do not allow metal objects to come into contact with the battery terminals.
• Do not expose to high temperature above 60°C (140°F) such as in direct sunlight or in a car parked
in the sun.
• Do not incinerate or dispose of in fire.
• Do not handle damaged or leaking lithium ion batteries.
• Be sure to charge the battery pack using a genuine Sony battery charger or a device that can charge
the battery pack.
• Keep the battery pack out of the reach of small children.
• Keep the battery pack dry.
• Replace only with the same or equivalent type recommended by Sony.
• Dispose of used battery packs promptly as described in the instructions.
[ AC Adaptor
Use the nearby wall outlet (wall socket) when using the AC Adaptor. Disconnect the AC Adaptor
from the wall outlet (wall socket) immediately if any malfunction occurs while using the apparatus.
The power cord (mains lead), if supplied, is designed specifically for use with this camera only, and
should not be used with other electrical equipment.
4-462-085-41(1)
For Customers in Europe
[ Notice for the customers in the countries applying EU Directives
This product has been manufactured by or on behalf of Sony Corporation, 1-7-1 Konan Minato-ku
Tokyo, 108-0075 Japan. Inquiries related to product compliance based on European Union legislation
shall be addressed to the authorized representative, Sony Deutschland GmbH, Hedelfinger Strasse 61,
70327 Stuttgart, Germany. For any service or guarantee matters, please refer to the addresses
provided in the separate service or guarantee documents.
This product has been tested and found compliant with the limits set out in the EMC regulation for
using connection cables shorter than 3 meters (9.8 feet).
[
Attention
The electromagnetic fields at the specific frequencies may influence the picture and sound of this unit.
[ Notice
If static electricity or electromagnetism causes data transfer to discontinue midway (fail), restart the
application or disconnect and connect the communication cable (USB, etc.) again.
[ Disposal of Old Electrical & Electronic Equipment (Applicable in the
European Union and other European countries with separate collection
systems)
This symbol on the product or on its packaging indicates that this product shall not be
treated as household waste. Instead it shall be handed over to the applicable
collection point for the recycling of electrical and electronic equipment. By ensuring
this product is disposed of correctly, you will help prevent potential negative
consequences for the environment and human health, which could otherwise be
caused by inappropriate waste handling of this product. The recycling of materials
will help to conserve natural resources. For more detailed information about
recycling of this product, please contact your local Civic Office, your household
waste disposal service or the shop where you purchased the product.
[
Disposal of waste batteries (applicable in the European Union and other
European countries with separate collection systems)
This symbol on the battery or on the packaging indicates that the battery provided
with this product shall not be treated as household waste.
On certain batteries this symbol might be used in combination with a chemical
symbol. The chemical symbols for mercury (Hg) or lead (Pb) are added if the battery
contains more than 0.0005% mercury or 0.004% lead.
By ensuring these batteries are disposed of correctly, you will help prevent
potentially negative consequences for the environment and human health which could otherwise be
caused by inappropriate waste handling of the battery. The recycling of the materials will help to
conserve natural resources.
In case of products that for safety, performance or data integrity reasons require a permanent
connection with an incorporated battery, this battery should be replaced by qualified service staff
only. To ensure that the battery will be treated properly, hand over the product at end-of-life to the
applicable collection point for the recycling of electrical and electronic equipment.
For all other batteries, please view the section on how to remove the battery from the product safely.
Hand the battery over to the applicable collection point for the recycling of waste batteries.
For more detailed information about recycling of this product or battery, please contact your local
Civic Office, your household waste disposal service or the shop where you purchased the product.
Notice for customers in the United Kingdom
A moulded plug complying with BS 1363 is fitted to this equipment for your safety and convenience.
Should the fuse in the plug supplied need to be replaced, a fuse of the same rating as the supplied one
and approved by ASTA or BSI to BS 1362, (i.e., marked with an
If the plug supplied with this equipment has a detachable fuse cover, be sure to attach the fuse cover
after you change the fuse. Never use the plug without the fuse cover. If you should lose the fuse cover,
please contact your nearest Sony service station.
Inserting the battery pack
1
Open the cover.
2
Insert the battery pack.
or mark) must be used.
Battery eject lever
Charging the battery pack
Power cord
(Mains lead)
Charge lamp
Lit: Charging
Off: Charging finished
Flashing:
Charging error or charging paused
temporarily because the camera is
not within the proper temperature
range
1
Connect the camera to the AC Adaptor (supplied), using the
dedicated USB cable (supplied).
2
Connect the AC Adaptor to the wall outlet (wall socket).
• Turn off the camera while charging the battery.
x Charging time (Full charge)
The charging time is approximately 115 min. using the AC Adaptor (supplied).
x Charging by connecting to a computer
The battery pack can be charged by connecting the camera to a computer using the
dedicated USB cable.
To a USB jack
x Battery life and number of images that can be recorded and
played back
Battery life
Shooting (still images) Approx. 110 min.
Actual shooting (movies) Approx. 50 min.
Continuous shooting (movies) Approx. 110 min.
Viewing (still images) Approx. 175 min.
• The number is based on the CIPA standard.
(CIPA: Camera & Imaging Products Association)
Inserting a memory card (sold separately)
Ensure the notched corner
faces correctly.
1
Open the cover.
2
Insert the memory card (sold separately).
x To remove the memory card/battery pack
Memory card: Push the memory card in once to eject the memory card.
Battery pack: Slide the battery eject lever. Be sure not to drop the battery pack.
Number of images
Approx. 220 images
—
—
Approx. 3500 images