D-Link DAP-1150 Quick Installation Manual page 19

Wireless access point supporting router mode

Hide thumbs Also See for DAP-1150:

Table of Contents

DAP-1150

5. If your ISP uses MAC address binding, in the Ethernet section, in the

MAC field, enter the MAC address registered by your ISP upon

concluding the agreement. To set the MAC address of the network

interface card (of the computer that is being used to configure the access

point at the moment) as the MAC address of the WAN interface, click the

Clone MAC button. To set the address of a device connected to the

access point's LAN at the moment, select the relevant value from the

drop-down list located to the right of the field.

6. For connection of PPPoE type: in the PPP section, enter authorization

data provided by your ISP (the username (login) in the Username field

and the password in the Password and Password confirmation

fields), or select the Without authorization checkbox if authorization

is not required.

Quick Installation Guide

Table of Contents