Menu Settings; Menu System - Kenwood KRC-578R Instruction Manual

Menu settings

B NR SCAN B.S/RDM REP
LOUD
#1-4
KRC-678R/678RV
Menu display
KRC-578R
FM/
¢
DISC+ SRC
PWR
OFF
DISC PROG/PTY
DAB
D.SCN MTL/M.RDM MENU
TI DISP
VOL ADJ NAME.S
AUD AUD
DISC
DISP
MENU AM/
DISC-
AUTO indicator
™ indicator
NEWS indicator
Menu display
AUTO indicator
NEWS indicator
™ indicator

Menu System

You can set the defaults for additional functions in the menu
38
mode.
Make a setting for each function, referring to the following
operations.
1
Enter the menu mode
Hold down the MENU button for one second or more.
EJECT
"MENU" is displayed when the menu mode is entered.
The function that you can adjust is indicated with the current
settings displayed.
2
Selecting function to set
¢
Press the FM button to search through the functions until you
see the one you want to adjust in the display.
Press the AM button to search through the functions
backward.
Example: If you want to switch the setting of the touch sensor
tone function from on to off, first search through the
functions until you see "Beep/BEEP ON" in the
display.
3
Changing setting for currently displayed function
Press either the 4 or ¢ button.
The setting will change for each function.
Example: The setting of the touch sensor tone will switch from
on to off, and "Beep/BEEP OFF" is displayed.
4
Ending the menu mode
Press the MENU button.
NOTE
Make sure to end the menu mode when finished.
If you fail to end the menu mode, several functions may not
operate properly, including the Traffic Information function and
the Alarm function.
— 25 —