Basic Operation; General Functions - Kenwood KMR-330 Instruction Manual

Basic Operation

[AUTO]
Release
Release
[ ] Control knob
Control knob

General functions

Power/Source Select button
Turns on the power.
When the power is on, the source switches between
Tuner ("TUNER"), CD ("CD"), Auxiliary input ("AUX"), and
Standby ("STANDBY") each time this button is pressed.
Press at least 1 second to turn off the power.
⁄
• The power will be turned off automatically after about 20
minutes have elapsed under the standby mode.
• When an optional accessory is connected, the source name
for each device appears.
Volume control Control knob
Turn the knob to adjust the volume.
Faceplate release
Releases the faceplate lock so that it can be removed.
Refer to the following diagram when reattaching the
faceplate.
¤
• The faceplate is a precision piece of equipment and can be
damaged by shocks or jolts.
• Keep the faceplate in its faceplate case while detached.
• Do not place the faceplate (and the faceplate case) in areas
exposed to direct sunlight, excessive heat or humidity. Also
avoid places with too much dust or the possibility of water
splashing.
• To prevent deterioration, do not touch the terminals of the
unit or faceplate with your fingers.
4
|
KMR-330
Display
[M.JOG]
Display Disc slot
[SRC] [1] [2] [3] [4] [5] [6]
[SRC]
Release
Auxiliary input
Disc slot
Auxiliary input
Auxiliary input
Used to connect a portable audio device with mini-
plug cable (3.5 ø).
⁄
• Use the mini-plug cable (stereo) which does not have any
resistance.
Muting volume upon reception of phone call
When there is a call, "CALL" is displayed and the audio
system is paused.
When the call ends, "CALL" disappears and the audio
system comes back on.
The audio system comes back on when [SRC] is
pressed during a call.
Subwoofer output
Switches between ON ("SUBWOOFER ON") and OFF
("SUBWOOFER OFF") each time pushing toward down
for at least 2 seconds.
[ ]
Auxiliary input
Control knob