Subscribe to Our Youtube Channel
Related Manuals for Aventura VENDOMA-MPG
Summary of Contents for Aventura VENDOMA-MPG
- Page 1 VENDOMA-MPG DVR Digital Video Recorder) Hardware Installation Guide Version 1.00.00 © 2004 Aventura Technologies, Inc.
-
Page 2: Table Of Contents
VENDOMA DVR INDEX 1. Features 2. Installation Notes 3. Products and Components 4. Install Capture Board 4-1. Vendoma MPG 12004 Board 4-2. Vendoma MPG 24008 Board Type A 4-3. Vendoma MPG 24008 Board Type B 4-4. Vendoma MPG 48016 Board Type A 4-5. - Page 3 For a description of the software and how to install it, please refer to the Installation and User Guide provided with your unit. This guide is for the following Aventura Technologies products: Vendoma MPG 12004, 24008, and 48016 capture boards.
-
Page 4: Features
VENDOMA DVR 1. Features About Your Vendoma-MPG DVR 4, 8, or 16 Camera Input/Output Normal input condition: 75 Ohm, 1 Volt 1 4, 8, or 16 Sensor Inputs 4 channels, 4 sensors (16 sensors optional) 8 channels, 8 sensors (16 sensors optional) - Page 5 VENDOMA DVR Motion Detection and Sensor Trigger You can set the DVR to record only when movements are detected, which saves storage space. Scheduled recording You can specify a recording schedule. Data Backup and Auto Backup Backed up data can be transferred to different media, such as DAT, CD, or DVD. You can also back up the data from a specific camera and view the date and time stamp on the footage.
-
Page 6: Installation Notes
VENDOMA DVR 2. Installation Notes We recommend the following for ideal performance: Intel chip motherboards Intel Pentium 4 or equivalent (Nothing lower than a 2.0 GHz Celeron) 256 MB or more of RAM 80 GB or more hard disk space If you try to use a 160 GB hard drive or higher, your operating system should be updated with the latest service pack. -
Page 7: Products And Components
VENDOMA DVR 3. Products and Components VENDOMA-MPG 12004 VENDOMA-MPG 24008 (120 Frames per second, 4 Channels) (240 Frames per second, 8 Channels) MPG 12004 Accessory MPG 24008 Accessory Type A MPG 24008 Accessory Type B MPG 48016 Accessory Type A MPG 48016 Accessory Type B The boards pictured above and their accessories may be subject to change by hardware upgrade. -
Page 8: Install Capture Board
VENDOMA DVR 4. Install Capture Board 4-1. VENDOMA MPG 12004 Board MPG 12004 Board and Accessories MPG 12004 Board TV-Out, Sensor, Relay Video Input Audio Input Watchdog... - Page 9 VENDOMA DVR 1 Connect audio input cable 2 Connect video input cable 3 Connect TV-OUT cable 4 Connect sensor relay cable 5 Connect Watchdog cable Assembly View Note: 1. After connecting the Watchdog cable, the other end of the cable must be plugged in to the Reset pin of the PC’s motherboard.
-
Page 10: Vendoma Mpg 24008 Board Type A
VENDOMA DVR 4-2. VENDOMA MPG 24008 Board Type A MPG 24008 Board and Accessories MPG 24008 Board TV-Out, Sensor, Relay Video Input cable Audio Input cable Watchdog... - Page 11 VENDOMA DVR 1 Connect audio input cable 2 Connect video input cable 3 Connect TV-OUT cable 4 Connect sensor relay cable 5 Connect Watchdog cable Assembly View Note: 1. After connecting the Watchdog cable, the other end of the cable must be plugged in to the Reset pin of the PC’s motherboard.
-
Page 12: Vendoma Mpg 24008 Board Type B
VENDOMA DVR 4-3. VENDOMA MPG 24008 Board Type B MPG 24008 Board and Accessories MPG 24008 Board BNC Back panel Audio Input cable Watchdog Video Input cable Sensor & relay cable... - Page 13 VENDOMA DVR 1 Connect Audio Input cable 2 Connect BNC cable 3 Connect Back panel cable 4 Connect Sensor Relay cable 5 Connect Watch dog cable Assembly View Note: 1. After connecting the Watchdog cable, the other end of the cable must be plugged in to the Reset pin of the PC’s motherboard.
- Page 14 VENDOMA DVR 4-4. Vendoma MPG 48016 Board (Board TYPE A) MPG 48016 Board and Accessories MPG 24008-1 Board MPG 24008-2 Board Video Input cable Audio Input cable TV-Out, Sensor, Relay 2EA Watchdog TV-OUT Loop...
- Page 15 VENDOMA DVR 1 Connect Video cable 2 Connect Audio cable (MPG 24008-1 & MPG 24008-2) (MPG 24008-1 & MPG 24008-2) 3 Connect TV-OUT cable 4 Insert Sensor Relay (MPG 24008-1 Only) (MPG 24008-1 & MPG 24008-2) 5 Connect Watch dog cable 6 MPG 24008-1 &...
- Page 16 VENDOMA DVR Assembly View 1. After connecting the Watchdog cable, the other end of the cable must be plugged in to the Reset pin of the PC’s motherboard. The Reset switch from the PC must be plugged in next to the Watchdog on the DVR card. 2.
-
Page 17: Vendoma Mpg 48016 Board Type B
VENDOMA DVR 4-5. Vendoma MPG 48016 Board TYPE B MPG 48016 Board and Accessories MPG 24008-1 Board MPG 24008-2 Board Video Input cable Audio Input cable Watchdog TV-OUT Loop Sensor & relay cable... - Page 18 VENDOMA DVR 1 Connect Audio cable 2 Connect BNC cable ( MPG 24008-1 & MPG 24008-2) ( MPG 24008-1 & MPG 24008-2) 3 Connect BNC cable 4 connect Back panel cable ( MPG 24008-1 & MPG 24008-2) 5 Insert Sensor Relay 6 Connect Watch dog cable ( MPG 24008-1 &...
- Page 19 VENDOMA DVR 7 MPG 24008-1 & MPG 24008-2 Assembly View Hook up TV-OUT Loop 1. After connecting the Watchdog cable, the other end of the cable must be plugged in to the Reset pin of the PC’s motherboard. The Reset switch from the PC must be plugged in next to the Watchdog on the DVR card.
-
Page 20: Pin Number
VENDOMA DVR 5. Pin numbers 5-1. MPG4 12004 Capture Board Composite-OUT Composite-Out Video In Audio In Sensor & Relay(digital I/O) Pin name Pin number Sensor Input 0-3 Input Common 0-1 17, 18 Relay(Digital) Output 0-3 19-22 Output Common 0-1 23, 24 Watchdog Pin name Pin number... - Page 21 VENDOMA DVR 5-2. MPG 24008 Capture Board & MPG 48016 Capture Board Composite-Out Composite-Out Video In Audio In Video I/O Pin name Pin number Video In 1, 3, 5, 7 Signal 2, 4, 6, 8 Video I/O (Camera Connector) Group name Camera number Camera 1-4 Camera 5-8...
- Page 22 VENDOMA DVR Sensor & Relay(digital I/O) Pin name Pin number Sensor Input 0-7 Input Common 0-1 17, 18 Relay(Digital) Output 0-3 19-22 Output Common 0-1 23, 24 Watchdog Pin name Pin number Signal Ground 1, 3 Reset Signal 2, 4 Pin Arrangements of MPG 48016 are as follows: Video I/O (Camera Connector) MPG 24008-1...
-
Page 23: Accessories
VENDOMA DVR 5-3. Accessories Back Board << Front >> << Rear >> Video I/o Pin name Pin number Signal Ground 1, 3, 5-29, 31, 33 Composite Video in 0-15 4, 6, 8-30, 32, 34 Sensor & Relay 8 Channel Sensor & Relay 16 Channel Sensor &... - Page 24 VENDOMA DVR Video Input Audio Input 1 2 3 4 5 6 7 8 G G G 4 3 2 1 Sensor & Relay (Digital I/O)
-
Page 25: Rs422/485 Converter
VENDOMA DVR 6. RS232 TO RS422/485 Converter This is the converter for controlling the Pan/Tilt/Zoom camera. 1. Connect the cable to computer serial Port. 2. You can select one of three Power connectors: 1 : Power from Capture Board (+5V) 1 2 : Power from System Power Supply 2 3 : Power from System Power Supply 3 3. - Page 26 VENDOMA DVR RS-422/485 Pin number RS-422/485 Connector Pin name Pin number - TxData + TxData - RxData + RxData Signal...
-
Page 27: Vendoma System
VENDOMA DVR 7. Vendoma System Assembly 7-1. Front Views 1. Cooling fan This fan removes the excessive heat generated in the system and enhances the system’s stability. 2. HDD LED When your hard disk drives (HDDs) are running, this light either blinks or remains steady). 3. -
Page 28: Rear View
VENDOMA DVR 7-2. Rear View 1. AC Power Cooling fan – This fan also removes the excessive heat generated in the system and enhances the system’s stability 2. Sensor & Relay I/O connectors – This is the sensor and relay-out port for systems that have a BNC back panel installed. - Page 29 VENDOMA DVR 14. Video output connector – This is for monitor (VGA) connector. 15. Pan/Tilt connector – If your system was equipped for Pan/Tilt/Zoom controls, then you have one of these connectors 16. LAN connector Please note that all DVRs must be connected an Uninterruptible Power Supply (a UPS) with line conditioning.
- Page 30 VENDOMA DVR 6: Pan/Tilt/Zoom Camera Connection Guide RS232/485 Converter This converter is for the control of Pan/Tilt which are supported in the RS232/485 Port 1. Connect DB9 pin cable between the serial Port in the motherboard board and RS232 port in this converter.
- Page 31 VENDOMA DVR 2. For power connection, you may utilize one of the following 3 sources. 1 : Connect the power cable from power unit to socket No.2 (+5V) 2 : Connect the power cable from power unit to socket No.3 3 : Connect power cable from capture board to socket No.1(Option) 3.
Need help?
Do you have a question about the VENDOMA-MPG and is the answer not in the manual?
Questions and answers