Code Soft CS6200 Series User Manual page 24

Printable character only- If this option is selected, the scanner will output the printable characters only,
i.e. in ASCII from 20H to 7EH.
Alphanumeric character only- If this option is selected, the scanner will output the alphanumeric
characters only, i.e. "A"-"Z", "a"-"z", "0"-"9".
Decoder optimization: If it is enabled, the scanner will optimize the decoder with error correction. This
function is not effective for all types of barcodes.
Data output delay in continue-scan mode: If it is enabled, in the continue-scan mode, the scanner can
store the data while continue-scanning. The scanner will output the data after the predefined delay
elapsed. The maximum storage of data is 1000 characters. If this parameter is set to be "00", the
scanner will not store data. And if the parameter is set to be "FF", the scanner will output data after
stopping scanning.
Option bar code
Scanning mode
Standby duration
Same barcode delay time
Double confirm
Global max. code length for 1D
symbology
Global min. code length for 1D
symbology
Multiple-scan setting
Option
Good-read off
Momentary
Alternate continue
Continue
Timeout off
01-99 (second)
00-FF (50ms)
16
00-09
(00: no )
04-99
01-99
Alpha. entry
00
01*
02
03
04
01-99
04*
00-FF
16
08*
00-09
00*
04-99
99*
01-99
04*
20
Single-scan setting
*
*
*
*