Quick Start - Ecleree nuo2 User Manual

4. QUICK START

Install and connect the NUO2 as described in the
INSTALLATION paragraph nº1.
We will describe a "Quick Start" procedure using the H-
LINE input of channel 1 and headphone monitoring output
only.
st
1 - Set the channel controls. Set Channel 1 GAIN,
TREBLE, MID, BASS rotary controls to their detented
centre position. Set the channel fader to its down position.
nd
2 - Adjust the MONITOR VOL (19) to its minimum, and
move the MONITOR PFL/MIX (14) control to MIX position.
rd
3 - Switch ON the CD Player connected to the H-LINE
input of channel 1.
th
4 - Connect a pair of headphones to the MONITOR Jack
output (20).
th
5 - Connect the AC main power cord to the back of the
mixer and switch ON the mixer.
th
6 - Check that the POWER LED below the VU-Meter is lit.
th
7 - Start the reproduction of a CD music track.
th
8 - Press the yellow PFL (9) button on channel 1 and
adjust GAIN so that the left VU-Meter stays around 0dBV.
th
9 - Set the channel fader (13) to its up position and place
the crossfader (16) on the "CHANNEL 1" side.
th
10 - Adjust the MONITOR VOL (19) in order to reach a
"comfort" sound level in your headphones.
th
11 - Check the powerful 3 band stereo equalization (3-4-5).
The EQ system is
manipulation: each band can be independently isolated
(OFF) through a large ergonomic rotary control, and the red
ISOLATOR switches additionally allow a fast "kill" effect on
any of the selected frequency bands.
th
12 - Check the crossfader (16) action.
The crossfader will allow you to crossfade between the
signals connected to channels 1 & 2 of the mixer. The
movement of the crossfader allows you to create a smooth
music track blend or fast "scratch" sound cuts. The fade
curve can be adjusted thanks to the SHAPE control
(rounded or square slope).
For further operations, please read the rest of this manual.
8
designed for creative sound