Table of Contents
Advertisement
Installation and replacement of hard disk drives
6.3
Installation of the extension HDD in
SISTORE AX8/AX16 250/100 V2.8
22
Siemens Building Technologies
Fire Safety & Security Products
These instructions describe the installation of an extension HDD unit into the
housing of a Digital Video Recorder of type SISTORE AX8 250/100. When
installing a HDD unit in AX16 250/100 proceed in the same manner.
1. First shutdown the device and
disconnect from the power supply.
2. Remove the screws marked in the
picture on the rear (3) and on both
sides of the SISTORE AX (8).
3. Lift up the housing cover at the rear of
the SISTORE AX, and lift it off. The
empty locations for the hard disk units
are then visible.
4. In general, there are two possible
locations for the extension of this AX
model:
above the Primary HDD
–
AND / OR
above the DVD drive.
–
HDD extension kit and screws for the
installation of the HDD into the frame.
03.2009
Hide quick links:
Advertisement
Table of Contents
