Aim for the Sky or Face the Music
foxL
DASH
was acoustically engineered with patented fifth
generation
Twoofers (tweeters
that also woof) for extremely
wide
sound
dispersion characteristics allowing it to lie
flat and fire its
sound omnidirectionally (for movies!
parties) or
directed
at the listener using the included
stand/case
(see
figure below) for more critical listening.
0
®
Battery Charging & Power Use
The
DASH can
be operated either via its internal rechargeable battery or
externally
via
AC power. Use our included universal AC adapter or any other
high-quality
5
Volt 2
to
3 Amp USB-A charger (such as the
Apple® iPad®
charger)
with
our
included
SV mini-barrel cable for best performance (your
power
output doubles).
Alternately you may charge using our micro-USB
cable, however power will not double, and the charging time, especially
if connected to a computer USB port, may be significantly slower.
Bluetooth Operation
0
Bluetooth.
Before you begin be sure your phone/tablet or other device is able to stream
A2DP Bluetooth music.
1. Pair/Make DASH Discoverable- From power OFF position, press and hold
POWER/BLUETOOTH button for about 6 seconds. You will see the power turn-
on and LED flashing Blue/Amber. This means the DASH is discoverable,
in pairing mode, and waiting to be paired and then connected.
2. Once paired, next time you power up DASH, it'll auto search and connect to
your last paired device, blue LED flashes (2 sees on/3 sees off).
3. Forced Pairing- If you want to pair to a different device from the one currently
paired, see step 1 above.
NOTE
1: Your DASH can connect to 1 device at time. To connect to a new device, turn the
original device off and move it fully out-of-range. Or Force Pair per above #3.
NOTE 2: Your DASH can store up to 8 Bluetooth devices. See "Clear Bluetooth Memory:'
Need help?
Do you have a question about the Foxl Dash 7 and is the answer not in the manual?