13. Lightning – For added protection for this product during a lightning storm, or when it is left unattended or unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the product due to lightning and power-line surges.
(if applicable) on it. Then put it away in a safe place. When shipping a product in for service: • Email or call soundmatters for the proper ship to address for servicing and an RMA (return merchandise copy of your original sales receipt that has the date, the Product model number and serial number (if applicable) written on it.
• A secure wall-mount installation provides perhaps the ultimate in performance. Use our optional wall mount brackets, available from your local dealer or www.soundmatters.com. CAUTION: If attached to a wall, the SUBstage will literally “shake the walls” so make sure that the SUBstage is very securely mounted and that any pictures, shelving with knickknacks, etc.
Check that cables are connected at both ends – check both the AC cord and the source cable. c. Confirm that you have playback on the rest of your system. 2) Buzzes with sound playing a. Make sure that the SUBstage is on a flat surface or is level.
(Dot indicates factory output daisy-chaining default “O” setting) Control Settings Start with these pre-set factory settings then experiment for best sound in your system. Level: O (indicated by the dot) Crossover: 150Hz EQ: OdB Phase: 180° for any MAINstage, or O° for other speakers •...
Need help?
Do you have a question about the system and is the answer not in the manual?
Questions and answers