Kenwood KDC-5021V Instruction Manual page 36

Troubleshooting Guide
?
The disc won't insert.65
✔ There's already another disc inserted.
☞ Press the [0] button and remove the disc.
?
Track Search can't be done.66-2
✔ For the albums first or last song.
☞ For each album, Track Search can't be done in the backward
direction for the first song or in the forward direction for the last
song.
MP3 source
?
Cannot play an MP3.67
✔ Not conforming to ISO 9660 Level 1/2, Joliet, and Romeo.
☞ Use a medium conforming to ISO 9660 Level 1/2, Joliet, and
Romeo.
✔ The MP3 has no or invalid track name
☞ Add the ".MP3" extension to the MP3 track name.
✔ The media is scratched or
dirty.69
☞ Clean the media, referring to the section on <CD cleaning> (page
8).
?
Noise or no sound generated when an MP3 is
✔ The track has the MP3 track name extension while it is not an MP3.
☞ Do not use the ".MP3" extension in non-MP3.
?
Takes time before the unit starts playing
✔ The medium contains many albums, tracks, and hierarchical levels.
☞ The unit checks all tracks on the loaded medium first. If the
medium has many tracks recorded, it may take a long time for the
unit before it starts playing MP3.
?
Fails to play MP3 in the intended
✔ The MP3 tracks were not written by the CD writer in the order in
which you wanted them to be played.
☞ Depending on the CD writer, you may be able to set the order in
which MP3 tracks are to be played by writing them onto a
medium with their track names beginning with play sequence
numbers such as "01" to "99".
extension.68
played.70
MP3.71
order.72
?
The sound skips when an MP3 is being
✔ The media is scratched or dirty.
☞ Clean the media, referring to the section on <CD cleaning> (page
8).
✔ The recording condition is
☞ Record the media again or use another media.
?
Can't display the ID3 tag information
✔ Record is not made in conformity with the ID 3 tag version1.x.
☞ Record in conformity with the ID 3 tag version1.x.
?
The songs in the selected folder aren't played in Album Select
mode.77
✔ There are no MP3 in the selected folder.
☞ Make sure there's recorded content in the MP3 media.
?
The MP3 track/album search takes
✔ Many tracks are recorded on the media.
☞ When the media directory is complex, the track/album search can
take time.
?
The MP3 related text isn't displayed
✔ A character is entered that this unit can't display.
☞ For the characters that can be used for MP3 text entry, refer to
<Notes on playing MP3> (page 6).
?
The MP3 track time isn't displayed
☞ There are times when it isn't displayed correctly according to the
MP3 recording conditions.
If the following situations, consult your nearest service
center:
• Even though the disc changer is connected, the Disc Changer source is
not ON, with "AUX" showing in the display during the Changer Mode.
• Even though no device (KCA-S210A, CA-C1AX, KDC-CPS87, KDC-CX87,
KDC-CPS85, KDC-CX85, KDC-CPS82 or KDC-CX82) is connected, the
Auxiliary input is entered when switching modes.
— 36 —
played.73-1
bad.73-2
correctly.75
time.78
correctly.79
correctly.80