Reporting Incorrect Camera Alerts; Types Of Fixed Safety Camera You Can Report - TomTom Blue&Me- 2 Reference Manual

Hide thumbs Also See for Blue&Me-TomTom 2:
Table of Contents

Advertisement

6. Tap Yes to confirm the location of the camera.
7. If necessary, choose the speed restriction for the camera.
You see a message confirming that a report has been created.

Reporting incorrect camera alerts

You may receive an alert for a camera that is no longer there. To report an incorrect camera alert,
do the following:
Note: You can only report an incorrect camera alert while you are at the location.
1. While you are at the location of the missing camera, tap Report in the Driving View.
Note: This must be done within 20 seconds of receiving the camera alert.
2. Tap No when asked if the camera still exists.
Note: It's possible to report or confirm the location of danger zones, but it's not possible to
remove them.

Types of fixed safety camera you can report

When you report a fixed safety camera, you can select the type of fixed camera you are reporting.
These are the different types of fixed safety camera:
Fixed camera
Red light camera
Toll booth camera
Speed trap
Other cameras
This type of safety camera checks the speed of passing vehicles.
This type of camera checks for vehicles breaking traffic rules at traffic
lights.
This type of camera monitors traffic at toll road barriers.
This type of camera checks the speed of passing vehicles and can be
moved to different locations.
All other types of cameras that do not fall into any of the above catego-
ries.
92

Advertisement

Table of Contents
loading

Table of Contents