Safety Cameras; About Safety Cameras; Safety Camera Warnings; Changing The Way You Are Warned - TomTom Blue&Me- 2 Reference Manual

Safety Cameras

About Safety Cameras

The Safety Cameras service warns you about a range of safety cameras and safety alerts including
the following:
Fixed safety camera locations.

Accident hotspot locations.

Speed trap locations.

Average speed check camera locations.

Red light camera locations.

Ungated railroad crossings.


Safety Camera warnings

By default, warnings are given 15 seconds before you reach a safety camera location. To change
the warning sound and when to be warned, tap Alert settings in the Safety Cameras menu.
You are warned in three ways:
Your device plays a warning sound.

The type of safety camera and your distance from the camera location is shown in the Driving

View. If a speed restriction has been reported for the camera, the speed is also shown in the
Driving View.
The location of the safety camera is shown on the map.

Note: For average speed cameras, you are warned by a combination of icons and sounds at the
start, middle and end of the average speed check zone.

Changing the way you are warned

Alert settings
To change the way your Blue&Me-TomTom 2 warns you about safety
cameras, tap the Alert settings button.
You can set under which conditions you are warned and what type of
sound will be played.
For example, to change the sound that is played when you approach a
fixed safety camera, do the following:
1. Tap Services in the Main Menu.
2. Tap Safety Cameras.
3. Tap Alert settings.
A list of safety camera types is displayed. A speaker is shown next to
the safety camera types that have been set for an alert.
4. Tap Fixed cameras.
5. Tap Next.
89