Chevrolet 2013 Express Owner's Manual page 144

Hide thumbs Also See for 2013 Express:
Table of Contents

Advertisement

5-42
Instruments and Controls
is dark enough outside. This
happens after the key is turned from
ON/RUN to LOCK/OFF.
Press
until EXIT LIGHTING
appears on the DIC display. Press
once to access the settings for
this feature. Then press
through the following settings:
OFF: The exterior lamps will not
turn on.
10 SECONDS (default): The
exterior lamps will stay on for
10 seconds.
1 MINUTE: The exterior lamps will
stay on for one minute.
2 MINUTES: The exterior lamps will
stay on for two minutes.
NO CHANGE: No change will be
made to this feature. The current
setting will remain.
To select a setting, press
the desired setting is displayed on
the DIC.
APPROACH LIGHTING
This feature allows you to select
whether or not to have the exterior
lamps turn on briefly during low light
periods after unlocking the vehicle
using the Remote Keyless
Entry (RKE) transmitter.
to scroll
Press
until APPROACH
LIGHTING appears on the DIC
display. Press
settings for this feature. Then press
to scroll through the following
settings:
OFF: The exterior lamps will not
turn on when you unlock the vehicle
with the RKE transmitter.
ON (default): If it is dark enough
outside, the exterior lamps will turn
on briefly when you unlock the
vehicle with the RKE transmitter.
The lamps will remain on for
20 seconds or until
while
transmitter is pressed, or the vehicle
is no longer off. See Remote
once to access the
on the RKE
I n f o r ma t i o n P r o v i d e d b y :
Keyless Entry (RKE) System
Operation on page 2 2 for more
information.
NO CHANGE: No change will be
made to this feature. The current
setting will remain.
To select a setting, press
the desired setting is displayed on
the DIC.
CHIME VOLUME
This feature allows you to select the
volume level of the chime.
Press
until CHIME VOLUME
appears on the DIC display. Press
once to access the settings for
this feature. Then press
through the following settings:
NORMAL: The chime volume will
be set to a normal level.
LOUD: The chime volume will be
set to a loud level.
NO CHANGE: No change will be
made to this feature. The current
setting will remain.
while
to scroll

Advertisement

Table of Contents
loading

Table of Contents