Chevrolet 2013 Express Owner's Manual page 143

Hide thumbs Also See for 2013 Express:
Table of Contents

Advertisement

To select a setting, press
the desired setting is displayed on
the DIC.
REMOTE DOOR UNLOCK
This feature allows you to select the
type of feedback you will receive
when unlocking the vehicle with the
Remote Keyless Entry (RKE)
transmitter. You will not receive
feedback when unlocking the
vehicle with the RKE transmitter if
the doors are open. See Remote
Keyless Entry (RKE) System
Operation on page 2 2 for more
information.
Press
until REMOTE DOOR
UNLOCK appears on the DIC
display. Press
once to access the
settings for this feature. Then press
to scroll through the following
settings:
LIGHTS OFF: The exterior lamps
will not flash when you press
the RKE transmitter.
LIGHTS ON (default): The exterior
while
lamps will flash when you press
on the RKE transmitter.
NO CHANGE: No change will be
made to this feature. The current
setting will remain.
To select a setting, press
the desired setting is displayed on
the DIC.
DELAY DOOR LOCK
This feature allows you to select
whether or not the locking of the
doors will be delayed. When locking
the doors with the power door lock
switch and a door is open, this
feature will delay locking the doors
until five seconds after the last door
is closed. You will hear three chimes
to signal that the delayed locking
feature is in use. The key must be
out of the ignition for this feature to
work. You can temporarily override
delayed locking by pressing the
on
power door lock switch twice or
I n f o r ma t i o n P r o v i d e d b y :
Instruments and Controls
on the RKE transmitter twice. See
Delayed Locking on page 2 7 for
more information.
Press
until DELAY DOOR LOCK
appears on the DIC display. Press
once to access the settings for
this feature. Then press
while
through the following settings:
OFF: There will be no delayed
locking of the vehicle's doors.
ON (default): The doors will not
lock until five seconds after the last
door is closed.
NO CHANGE: No change will be
made to this feature. The current
setting will remain.
To select a setting, press
the desired setting is displayed on
the DIC.
EXIT LIGHTING
This feature allows you to select the
amount of time you want the
exterior lamps to remain on when it
5-41
to scroll
while

Advertisement

Table of Contents
loading

Table of Contents