Related Manuals for TRIUMPH BOARD RESISTIVE 78“ USB
Summary of Contents for TRIUMPH BOARD RESISTIVE 78“ USB
- Page 1 User Manual v 2.1 March 2013 RESISTIVE USB Series TRIUMPH BOARD RESISTIVE 78“ USB TRIUMPH BOARD a.s. , Neklanova 122/15, 128 00 Praha 2, Czech Republic, European Union, www.triumphboard.com...
-
Page 2: Table Of Contents
Safety Information Cleaning the Writing Surface Preventing Damage to the Writing Surface Product Description Technical Specifications Package Contents 5) Wall Mount Installation 6) Software Installation HW Installation Connection Connection Cable Calibration Hotkeys functions Right click function Double click settings 8) Repair Service and Contacts TRIUMPH BOARD a.s. Page 2 of 26... -
Page 3: Declaration Of Conformity
RESISTIVE Series DECLARATION OF CONFORMITY We TRIUMPH BOARD a.s., Neklanova 122/15, 128 00 Praha 2 Declare under sole responsibility that the product: TRIUMPH BOARD RESISTIVE 78” USB Model: 78” RESISTIVE USB EAN: 8592580081583 Is in conformity of essential requirements of EU directives:... -
Page 4: Safety Information
RESISTIVE Series Safety Information Please read, understand and follow the information contained in this User Guide before installation and use this product. Safety Information This product was designed, and intended for use indoor via a USB cable connected to a desktop or laptop computer. - Page 5 Never portable the power cord or power plug or power adaptor with wet hands. Electric shock will result. Stop operation immediately if your product emits smoke, excessive heat, abnormal smell or unusual noise. These conditions can cause fire or electronic shock. Immediately turn your product off and unplug the power cord or power plug or power adaptor, and contact an authorized service repre sentative for service. When disconnecting this product, hold the power plug or the power adaptor instead of the power cord. Pulling on a power cord forcibly can damage it and cause fire or electric shock. To prevent fire or shock hazard, do not expose this product to rain or any type of moisture. TRIUMPH BOARD a.s. Page 5 of 26...
- Page 6 Unplug the power cord, power plug or power adaptor from the AC power outlet when: – The power cord or power supply plug is damaged. – A liquid is spilled onto this product. – This product is exposed to rain or water. – This product becomes malfunctions and/or need repairing. – This product falls or after its cabinet is damaged. TRIUMPH BOARD a.s. Page 6 of 26...
- Page 7 • Do not lean against this product even this product is mounted on the wall. • When this product is not used over an extended period of time, take the batteries out of the electronic stylus. Otherwise the batteries may leak. Do not use the leaked batteries. • Do not install this product where it may be exposed to direct sunlight, near heating equipment, or near air-conditioning vents. • Do not install this product in strong sunlight or strong lighting. • Do not install this product in locations where the temperature may change suddenly. • Do not allow writing to remain on the screen for an extended period of time as it will become harder to erase. • Do not erase with an overly dirty eraser. TRIUMPH BOARD a.s. Page 7 of 26...
-
Page 8: A) Cleaning The Writing Surface
If any trace of the original permanent ink remains, spray the area with standard glass or whiteboard cleaner and wipe clean. Preventing Damage to the Writing Surface While the TRIUMPH BOARD 78” RESISTIVE interactive whiteboard is very durable, sharp writing instruments, such as ballpoint pens or fine-pointed pens, can damage the surface if they’re applied with heavy pressure. Keep these types of pens away from the interactive whiteboard and avoid abrasive erasers and cleaning materials. TRIUMPH BOARD a.s. Page 8 of 26... -
Page 9: Product Description
The TRIUMPH BOARD RESISTIVE USB product is a touch sensitive, front projection interactive whiteboard that enables you to do everything you can do at a computer workstation—open files, conference with others, work on documents, visit websites, play video clips and more—simply by touching the board. You can also write over any application with your finger, and then save these notes for future reference and distribution. TRIUMPH BOARD RESISTIVE connects to a computer through a fast USB 2.0 interface, makes the lecture more interactively and enhances the efficiency of the class. TRIUMPH BOARD RESISTIVE supports all Microsoft Windows XP, Vista and 7, 8, Linux, Mac. TRIUMPH BOARD RESISTIVE’s technology is most common technology on the world. Touch sensitive (resistive) technology uses two flexible sheets coated with a resistive material and separated by gap. A uniform voltage gradient is applied to one sheet. When contact is made to the touchscreen surface, the two sheets are pressed together and the second sheet measures the voltage as a distance along the first sheet. This combination of voltage and distance provide X coordinate. After the X coordinate is located,... -
Page 10: Technical Specifications
RESISTIVE Series Technical Specifications TRIUMPH BOARD 78” RESISTIVE USB EAN: 8592580081583 Active screen area size: 78”, 1987mm diagonal, 1590×1192 mm Aspect ratio: Technology: Touch sensitive (resistive) Resolution: 16384 ×16384 Projection screen area: 78”, 1987mm diagonal, 1590×1192 mm Interface Type: USB 2.0, compatible with USB 1.1, 2.0 a 3.0 Cable Length: 10 m Working Environment: -15 to 50°C Process Rate: 500points/second Response Time: 8 ms Cable Transmission speed 57200 bps... -
Page 11: Package Contents
Mounted on the wall Suspender Mounted on the board Supporter Mounted on the wall and the board Swell plug Self-tapping screw M4×30 Self-tapping screw M4×16 Screw M5×12 Pentray (not included in package) Self-tapping screw M3×10 TRIUMPH BOARD a.s. Page 11 of 26... - Page 12 – Use only the designated wall mount. – Follow all installation instructions carefully. – Make sure the mounting screws are properly sized to handle the weight of the board. – Make sure the wall mount is firmly and securely anchored to a solid structure. – Make sure the board is fastened firmly and securely to the wall mount before using it. • Do not install this product in location where it may be exposed to direct sunlight, strong lightning, near heating equipment, or near air-conditioning vents. • Do not install this product in location where the temperature may change suddenly. The following procedures illustrate the mounting of the TRIUMPH BOARD Series interactive whiteboards onto a wall surfaced with gypsum or drywall. Before installation, please check all accessories, and measure horizontal distance and vertical distance between them. TRIUMPH BOARD a.s. Page 12 of 26...
- Page 13 RESISTIVE Series Install suspender (2) with screws(7) to the board. For pentray(8) (not included in packaging), please Install it with screws(9) to the board) Make sure the fixed position of wall-mounting accessory TRIUMPH BOARD a.s. Page 13 of 26...
-
Page 14: Software Installation
Install TB RESISTIVE USB Driver software Notice: Please install all the related software successfully to make sure this software can work normally following the below installation Steps: Power on the computer. After booting the operating system first put RMeasiteach setup disc into your CD-ROM driver and click setup.exe to install RMeasiteach software. Installation of RMeasiteach must be done as the first step before installation of TB RESISTIVE Driver.exe to enable proper hotkey functioning in RMeasitech software. Insert the TRIUMPH BOARD setup disc into your CD-ROM driver. TRIUMPH BOARD a.s. Page 14 of 26... - Page 15 Do not connect cable before software installation. Some functions are subject to the restrictions of the operating system. Please follow up below procedure to completely install the TRIUMPH BOARD Drivers software into your computer before you make any application upon the TRIUMPH BOARD Interactive Whiteboard. Step 1: Start to install driver For proper function of TB RESISTIVE Driver follow the default save path. Step 2: Select save path to continue. Use RMeasiteach save path for proper function of Hotkeys in RMeasiteach software TRIUMPH BOARD a.s. Page 15 of 26...
- Page 16 RESISTIVE Series Step 3: Choose Additional Tasks Step 4: Ready to install driver Step 5: Installation process TRIUMPH BOARD a.s. Page 16 of 26...
- Page 17 RESISTIVE Series Step 6: Click finish for complete the driver installation procedures Information about 64-bit machine If user has 64-bit machine, after TRIUMPH BOARD RESISTIVE DRIVER.exe installation continue with 64bit-Update For Driver.exe. Step 1: Start to install 64-bit Update for driver Step 2: Choose Next TRIUMPH BOARD a.s. Page 17 of 26...
- Page 18 RESISTIVE Series Step 3: Installation of 64-bit Update for Driver Step 4: Device Driver Installation Wizard will search for Silicon Laboratories Drivers Step 5: Device Driver Installation Wizard found Silicon Laboratories Drivers. If not, the Drivers will be installed from internet. If the computer is not connected to internet, install Drivers from TB TRIUMPH BOARD a.s. Page 18 of 26...
-
Page 19: Hw Installation
RESISTIVE Series Step 6: Click finish for complete the 64-bit Update for Driver installation procedures. HW Installation Connection User must have PC, projector, TB RESISTIVE USB and connect them as shown in the figure below. TB RESISTIVE USB - Model Connection Diagram Connection Cable TRIUMPH BOARD a.s. Page 19 of 26... -
Page 20: C) Calibration
If this won´t help you to solve a problem, we recommend you to uninstall RMeasiteach program, program drivers, r estart PC and finally install it all again. Calibration Standard Adjusting To provide an accurate and appropriate response to your touch, the TRIUMPH BOARD RESISTIVE driver needs to know exactly where the projected image from your computer is located on the interactive whiteboard. There are two methods. Double click “TB RESISTIVE Driver” desktop shortcut Click “Start>All Programs>... - Page 21 RESISTIVE Series Please Note: You need to re-adjust when the following situations: Move the TRIUMPH BOARD RESISTIVE interactive whiteboard; Move the projector; Re-install TRIUMPH BOARD Drivers; Change the computer resolution. 3. Choose adjusting points: 4 points; 6 points; 9 points; 12 points; 16 points;20 points; 25 points TRIUMPH BOARD a.s. Page 21 of 26...
-
Page 22: D) Hotkeys Functions
RESISTIVE Series 4. Press firmly in the small green square in the center of each Red Cross that appears in the orientation screen with your finger or stylus one by one (While setting the position, make sure your finger tip is vertical to the whiteboard, and restart the position if the click is wrong). You can exit the calibration by pressing the “Esc”. Hotkeys functions 10 hotkey features are available for users in RMeasitech software. Assigned functions are listed in table bellow. No hotkeys calibration is needed. HOTKEY FUNCTION Minimize RMeasiteach to system tray New page Save page Undo - one step back Redo - one step forward TRIUMPH BOARD a.s. Page 22 of 26... -
Page 23: Right Click Function
RESISTIVE Series Select objects Black pen Red pen Blue pen Eraser Right click function The right click function can be simulated by 2 seconds longer pressing by finger of stylus on iwb surface. These function is supported under Windows systems. Under Linux and Mac functions of the right click is not supported. Double click settings For proper operation of double click is needed to set an appropriate time interval between two click. Click Control Panel item in Start Menu Than click on Devices and Printers TRIUMPH BOARD a.s. Page 23 of 26... - Page 24 RESISTIVE Series Right-click the mouse icon In the Mouse Properties window, set the double-click speed slider rather slower values. Click OK and double check that works properly. If not, try to double click make slow down or speed up. TRIUMPH BOARD a.s. Page 24 of 26...
-
Page 25: Repair Service And Contacts
RESISTIVE Series Repair Service and Contacts Please contact your local supplier for the warranty and technical service or find all warranty conditions and service partners on our website www.triumphboard.com. For any questions please email us to info@triumphboard.com TRIUMPH BOARD a.s. Neklanova 122/15 128 00 Praha 2 Czech Republic Phone: +420 224910221 Fax: +420 224910218 E-mail: info@triumphboard.com www.triumphboard.com Notices: Every effort has been made to ensure all information contained in this user guide is correct, but the accuracy or completeness is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability...
Need help?
Do you have a question about the RESISTIVE 78“ USB and is the answer not in the manual?
Questions and answers