Clean O-Ring / Seal Area - Sealife ReefMaster Manual To Installation And Use

d) Clean O-Ring / Seal Area
The waterproof seal is the most critical part. It must be kept meticulously clean. You must
carefully check the O-ring area before each use. Brush away any sand, dirt, hair, etc.
from O-ring. Use the cleaning brush provided.
Do not remove O-rings.
The O-ring should never be greased or removed. If the O-ring shows signs of damage
have it replaced by an authorized SeaLife Service Facility. Ask your dealer or contact the
SeaLife Service Center (see back cover) or your country's distributor.
Clean off O-ring with
brush provided.
11