Ford Content Owner's Manual page 99

Flash to pass
Pull toward you slightly to activate
and release to deactivate.
PANEL DIMMER CONTROL
Use to adjust the brightness of the
instrument panel and all applicable
switches in the vehicle during
headlamp and parklamp operation.
Move the control to the full upright
position, past detent, to turn on the
interior lamps.
Move the control to the full down
position, past detent, to prevent the
interior lights from illuminating
when the doors are opened. When
the control is in the full down position, it acts as a dome defeat/override.
VERTICAL AIM ADJUSTMENT
Your vehicle is fitted with either VOR (conventional halogen) or VOL
(High Intensity Discharge - HID) headlamps. The adjustment procedure
depends on the type of headlamps that are equipped on your vehicle. VOR
or VOL is marked on the bottom of the headlamp in the center of the
lamp. Please check the lens markings prior to adjusting the vehicle aim.
1. Park the vehicle on a level surface approximately 7.6 meters (25 feet)
from a vertical wall or screen directly in front of it.
• (1) Eight feet
• (2) VOR – Measurement of the center height of lamp to ground
VOL – Subtract 50 mm's (2 inches) from the measurement of the
center height of the lamp to ground
• (3) Twenty-five feet
• (4) Horizontal reference line
Lights
INT1
99