Advertisement
Content Identifier
DICE interface for FMRDS USB-PRO
Installation Guide/User Manual
user manual
Connection Diagram
iPod
USB
flash drives
MENU
Installation Tips / Check List
Frequency configuration settings:
module
frequency
selector
Note:
1. Disconnect the vehicle harness from module and cycle ignition off for 5 seconds after changing
the switches.
2. Try to select a transmitting frequency that is not occupied by a local FM radio station.
With the Pro-install kit, easy access to 12V constant/switched power can be found at the 12V DC outlet.
If T-taps are being used for splicing power/ground, make sure the correct size T-taps are used so it has
good contact with the wiring. Loose wire will cause unexpected operation.
FMRDS USB-PRO
FMRDS USB-PRO
module
FMRDS USB-PRO
Apple IR remote controller
(optional)
IR receiver
USB/dock cable
Sirius SAT radio tuner
(SC-C1)
Sirius connector
FMRDS USB-PRO
ON/OFF Switch Positions
OFF
ON
12
for Pro Install kit:
pro-install antenna
pro-install power cable
cable adapters
module (front)
module (rear)
USB
power cable
upgrade port
FM (MHz)D
ip switch 1
88.7
OFF
93.3
ON
97.5
ON
107.7
OFF
IR receiver
antenna
antenna
out
in
+12
ground
ignition
Dip switch 2
OFF
OFF
ON
ON
113
Advertisement
