Download Print this page

URTON M2 User Manual

Large-diaphragm-tube-microphone

M A N U A L

Table of Contents

Need help?

Do you have a question about the M2 and is the answer not in the manual?

Page 1 M A N U A L...
Page 2 (230 or 115 are selectable) please follow instructions of extra instruction sheet. All condenser microphones are sensitive to humidi- ty. In case your M2 goes from cold to warm environment, please let it sit open and unconnected for 24 hrs in the new environment.
Page 3 Wide Cardioid. The pattern control at the power supply is out of use. „Red Mode“ will turn the M2 into a distin ctive sensitivity to proximity e ect. The sound of the M2 will be strongly related to that of the original vintage Neumann U47.
Page 4 Analog Audio GmbH. Please do not try to repair your URTON on your own. You probably will cause more damage to it. We wish the very most and best succes with your URTON M2 microphone to you! Enjoy this fine piece of German precision handcrafting! It will help you making the best recordings ever…...
Page 5 CE specs and designed for most possible safety, reliability and audio performance as well. All components are choosen by URTON for this special purpose, there is no need for the user to improve any characteristics by exchanging parts. Please leave the power supply like it is, it will not get better.
Page 6 Lift top of case carefully. Watch out not to damage the yellow-green ground shielding cable inside while opening the housing. If disconnecting this cable do not forget to connect again when closing the case. The switch for changing mains voltage is located on print assy between blue mains transformer and front of housing.