Download Print this page

URTON M3 Manual

Large diaphragm tube microphone

M A N U A L

Table of Contents

Need help?

Do you have a question about the M3 and is the answer not in the manual?

Page 1 M A N U A L...
Page 2 Thus it demands special care in handling. The URTON M3 uses a twin capsule with platinum diaphragms of only 4 m gauge. The capsules are mounted on a shock absorbing spider to prevent subsonic distortions.
Page 3 Please allow your microphone to warm up and switch on in time. • Sound shall be provided to the M3 from the side – i.e. from direction of the URTON logo (maybe also from rear in Figure of 8). •...
Page 4 Analog AudioGmbH. Please do not try to repair your URTON on your own. You probably will cause more damage to it. We wish the very most and best succes with your URTON M3 microphone to you! Enjoy this ne piece of German precision handcrafting! It will help you making the best recordings ever…...
Page 5 CE specs and designed for most possible safety, reliability and audio performance as well. All components are choosen by URTON for this special purpose, there is no need for the user to improve any characteristics by exchanging parts. Please leave the power supply like it is, it will not get better.
Page 6 Lift top of case carefully. Watch out not to damage the yellow-green ground shielding cable inside while opening the housing. If disconnecting this cable do not forget to connect again when closing the case. The switch for changing mains voltage is located on print assy between blue mains transformer and front of housing.