Digiguard H.264 Digital video recorder -4/8/16 channel models User Manual page 9

Name
1 RS 485
RELAY Output
SENSOR Input
2 VGA
3 ETHERNET
4 RS-232C
5 Camera Input
6 Loop Out
7 Monitor Output
8 SPOT Output
9 DC Power
10 PS2 Mouse
11 Audio
12 POWER
SWITCH
NOTE : You can not mix PAL and NTSC equipment. For example, you cannot
use a PAL camera and NTSC monitor.
Connection with PTZ Camera or other external devices using RS 485
Relay Output terminal
Sensor Input terminal
VGA Output to CRT or TFT LCD Monitors
Connection to Ethernet devices
Connection to external devices such as PC using RS-232C to control DVR
Connection with NTSC/PAL Cameras
Camera Loop out
Connection with NTSC/PAL Composite Monitor
Connection from Analog backup output to external devices
DC 12V 6.67A Adaptor
Connection to PS2 Mouse
Microphone input and Audio output
Power ON/OFF Switch
To avoid accidental deletion of HDD data, please make sure to press
MENU button and enter into setup menu before powering off the unit.
This takes the unit out of recording mode for safe shutdown.
Function
9