Ptz Camera Setup - Tibet System T04 User Manual

[PTZ Camera Setup]

* Camera ID: Leave it as it is if only one PTZ camera is used.
Otherwise, give each camera a different number.
* Using Previous State : Tick the box and set time period to move
camera back to initial position after a certain period of time.
Select the port used for PTZ camera.
* Bit per Second: It is 9600 for most of PTZ cameras. But a few
can have different values.
Refer to camera manual.
* Apply All: The same settings will be applied to the rest of the
cameras by clicking on "Apply All".
[Preset & Touring]
Either click the right mouse on camera picture or click on the Preset (Touring) button for Preset (Touring) setup
and use.
When using a PTZ camera, check the box
and select a model name. MagicRadar
DVR system supports nearly 40 different
protocols.
33
User's Manual (4.2.0.0)
Tibet System Co., Ltd.