Kenwood KAC-526X Instruction Manual page 6

Connection
RCA cable connection
2CAUTION
Do not connect cables and
leads to both RCA cable input
jacks and the speaker input
terminals simultaneously, for
this may cause malfunction
or damage.
RCA cable ground terminal
When using an RCA cable with
a ground lead attached, connect
the ground lead to this terminal.
Speaker level input connection
Connect the unit by inserting it in the connection between the genuine-accessory car stereo and
speakers.
Left output
Right output
Speaker level input terminals
Lead terminal
(Commercially
available parts)
2CAUTION
• The genuine-accessory car stereo shall have a maximum power output of no more than 25 W.
• Do not connect the speaker output leads from a power amplifier (Optional) to the speaker input
terminals of this unit, for this may cause malfunction or damage.
• Do not connect cables and leads to both RCA cable input jacks and the speaker input terminals
simultaneously, for this may cause malfunction or damage.
• Connect the power control lead to a power supply which can be turned ON/OFF by the ignition
key switch (ACC line).
With this connection, shock noise may be generated when the power of the genuine-accessory
car stereo is switched ON/OFF.
6
Left output (White)
Right output (Red)
RCA cable (Commercially
available part)
Left input
OPERATION
FILTER
OFF LPF STEREO MONO(Lch) LINE IN
L R
0.5 0.3
1.0
GND
MIN MAX
INPUT
SENSITIVITY(V)
Genuine-accessory
Left input
OPERATION
FILTER
OFF LPF STEREO MONO(Lch)
LINE IN
L R
0.5 0.3
1.0
GND
MIN MAX
INPUT
SENSITIVITY(V)
CENTER UNIT
(Cassette receiver,
CD receiver, etc.)
Right input
SPEAKER LEVEL INPUT
LEFT RIGHT
2CAUTION
Do not use this terminal for power source
grounding. This unit will be damaged if the
power source grounding wire is connected
to this terminal.
car stereo
+
Right input
SPEAKER LEVEL INPUT
LEFT RIGHT
Power control cable
ACC
-
Battey