Welcome!
Congratulations on your purchase of a Logitech
a stylus for data entry. It is a fully functional and compact keyboard for typing text and executing commands. The KeyCase
pressure-sensitive scroller for easy navigation and offers one-touch access to your favorite applications. It uses an ElekTex
that interprets where and how hard you press, ensuring that data entry and command execution are both accurate and responsive.
Despite being lightweight, the keyboard fabric is durable, offering many years of reliable service. When not in use, the sleek, wrap-around
design of the KeyCase
™
serves as a convenient protective case for the Palm
pocket, briefcase, or handbag.
Installing the Logitech
®
™
The Logitech
KeyCase
requires software that is located on the Logitech
®
then perform a HotSync
operation to transfer this software to the Palm
For a Windows
Installation
®
1. Turn on the computer, then perform a HotSync
™
(Refer to your Palm
handheld documentation for more information about performing a HotSync
®
2. Insert the Logitech
TypeAway
instructions to install the software on your computer. If the Setup screen does not display, go to the Windows
and click Start, then Run. Type D:\setup.exe (where D: is the drive designation of the CD-ROM drive).
3. Perform another HotSync
4. Reset the Palm
™
handheld by tapping the Reset button. After resetting, if you have another keyboard driver installed
on your Palm
™
handheld, or any other software that takes over the handheld serial port, you must disable it before connecting
the Logitech
®
KeyCase
™
. If not, the handheld may attempt to synchronize when you first use the KeyCase
5. On the Palm
™
handheld, tap the Logitech
have displayed.
™
6. Turn off the Palm
handheld and connect it to the Logitech
For a Macintosh
Installation
®
1. Turn on the computer, then perform a HotSync
handheld documentation.)
®
2. Insert the Logitech
TypeAway
its icon on the desktop, then open the "Macintosh" folder followed by the KeyCase folder.
3. Double click "KeyCase.prc" to install that program, then double-click "appctr.prc" to install that program.
Both programs must be installed.
4. Perform another HotSync
2
®
™
KeyCase
for the Palm
Software for KeyCase
®
®
operation to back up the data on your Palm
™
software CD into the computer's CD ROM drive, then follow the on-screen
®
operation to transfer the Logitech
®
icon to launch the driver software, then click "Done" after the Tips
®
operation to back up the data on your handheld. (Refer to your Palm
™
software CD into the computer's CD ROM drive, open the CD by double-clicking
®
operation to transfer the Logitech
English
™
handheld. The KeyCase
™
handheld, allowing you to fit both units nicely into your
™
®
software CD. You must install this software on your computer,
™
handheld.
®
and AppCentral software to the Palm
®
™
KeyCase
, as described below.
®
and AppCentral software to the Palm
™
frees you of the limitations of using
™
has a special
™
fabric sensor
™
handheld.
®
operation.)
®
Taskbar
™
handheld.
™
.
™
handheld.
™