Troubleshooting - ViewSonic VA2214S User Manual

Troubleshooting

No power
• Make sure the power button (or switch) is ON.
• Make sure the A/C power cord is securely connected to the LCD display.
• Plug another electrical device into the power outlet to verify that the outlet is
supplying proper voltage.
Power is ON but no screen image
• Make sure the video cable supplied with the LCD display is properly secured to
the video output port on the back of the computer. If the other end of the video
cable is not attached permanently to the LCD display, properly secure it to the
LCD display.
• Adjust brightness and contrast.
• If you are using an Macintosh older than G3, you need a Macintosh adap
Wrong or abnormal colors
• If any colors (red, green, or blue) are missing, check the video cable to make
sure it is securely connected. Loose or broken pins in the cable connector could
cause an improper connection.
• Connect the LCD display to another computer.
• If you have an older graphics card, contact ViewSonic
Control buttons do not work
• Try pressing only one button at a time.
for a non-DDC adapter.
®
12