Toshiba 32L3300 Series Owner's Manual page 23

Resetting the Advanced Sound Settings
This feature resets the Advanced Sound Settings
to the factory settings.
NOTE:
If no sound settings have been changed, Reset is not
available.
1
From the Advanced Sound Settings menu,
press  or  to select Reset, and then press
OK.
2
A confi rmation message will appear. Press  or
 to select Yes, and then press OK.
Using the Audio Distortion Control
Prevents audio distortion.
1
From the SOUND menu, press  or  to select
the Audio Distortion Control.
SOUND
MTS
Dual
Balance
Advanced Sound Settings
Audio Distortion Control
Dynamic Range Control
Audio Level Offset
Spectrum Analyser
2
Press  or  to select On or Off .
Using the Dynamic Range Control
This feature allows control of compression for Dolby
Digital.
1
From the SOUND menu, press  or  to select
the Dynamic Range Control.
2
Press  or  to select On or Off .
Using the Audio Level Off set
Sometimes there can be large changes in volume
when switching from an ATV channel or an external
input. Using this feature reduces these volume
diff erences.
1
From the SOUND menu, press  or  to select
the Audio Level Off set.
2
Press  or  to adjust the settings as desired.
Using the TV's features
Auto
Dual 1
0
On
Off
0
Using the Spectrum Analyser
Shows sound in a visual format.
1
From the SOUND menu, press  or  to select
the Spectrum Analyser, and then press OK.
NOTE:
The Spectrum Analyser display turns off when any
other procedure is performed.
Setting the Digital Audio Output
1
Press MENU, and then press  or  to display
the PREFERENCES menu.
2
Press  or  to select AV Connection and
press OK.
PREFERENCES
Network Setup
Teletext
Teletext Language
Panel Lock
Display Settings
AV Connection
Energy Saving Settings
Blue Screen
3
Press  or  to select Digital Audio Output.
AV Connection
Input Labelling
PC/HDMI 1 Audio
HDMI 1 Audio
Digital Audio Output
4
Press  or  to select Auto or PCM.
• Auto: This mode automatically outputs in
Dolby Digital format (for Dolby Digital
audio signals) or PCM format (for PCM
audio signals) from an HDMI or USB
device to the digital audio output
socket.
• PCM: Select this when a 2ch digital stereo
amplifi er is connected to the TV. When
you select a Dolby Digital or MPEG
audio track, the sound is converted to
the PCM (2ch) format and output.
Auto
1
Off
On
PC
Digital
Auto
23