Kenmore 625.38306 Owner's Manual page 65

INSTALL COVERS
After installing your water softener, replace the covers.
Angle the covers so the main cover clips onto the back
first, then bring down in front and clip on the two (2) tabs
inside the rim of the salt hole and lower the salt cover
closed. See Fig. 23.
RESTART THE WATER HEATER
Turn on the gas (or electric) supply to the water heater
and light the pilot.
YOUR PLUMBING INSTALLATION AND ELECTRICAL
WORK ARE NOW COMPLETE.
Salt Hole
Cover
INSTALL COVERS
Cover
r./(Main)
\
,/
y
/
FIG. 23
Questions? Call The Kenmore Water Line 1-800-426-9345
17