Bar Code Scanning
Activate DataWedge
DataWedge lets you use the 3.2MP digital
camera on your ES400S to scan and decode
bar code information.
1. Tap
> Settings > System > DataWedge.
2. Tap Running to enable scanning. The radio
button will change to "Yes" and status will
show "Ready."
3. Tap Basic configuration > Barcode input,
ensure that Camera Scanner Driver is
selected, and tap OK.
Scan a Bar Code
1. With DataWedge activated (see previous
instructions), launch an application that
supports text input, such as Excel Mobile or
Word Mobile. (Tap My Apps > Excel Mobile
2010 or Word Mobile 2010.)
2. Aim the camera lens at a barcode.
3. Press and hold the Scan key. You'll see the bar
code on the display screen. Use the red aiming
line to scan the bar code.
4. You'll hear a beep when the scan is complete.
The bar code information will be recorded in the
open application.
Note: You cannot use the device's camera while
DataWedge is enabled, so make sure to disable
DataWedge when you're finished. Tap
System > DataWedge > Running to disable it and
re-enable your camera.
> Settings >