D-Link DCS-7413 Quick Installation Manual

Full hd day & night outdoor network camera
Hide thumbs Also See for DCS-7413:

Advertisement

Quick Installation Guide

Full HD Day & Night Outdoor Network Camera
This document will guide you through
the basic installation process for your new
D-Link Network Camera.
DCS-7413
Quick Installation Guide

Advertisement

Table of Contents
loading

Summary of Contents for D-Link DCS-7413

  • Page 1: Quick Installation Guide

    Quick Installation Guide Full HD Day & Night Outdoor Network Camera This document will guide you through the basic installation process for your new D-Link Network Camera. DCS-7413 Quick Installation Guide...
  • Page 2: Quick Install Guide

    This installation guide provides basic instructions for installing the Network Camera on your network. For additional information about how to use the camera, please see the User’s Manual which is available on the CD included in this package or from the D-Link support website. Installation Steps 1.
  • Page 3: Hardware Overview

    2 screws. Install the SD Card Insert the SD card into the camera with the gold contacts oriented towards the base of the camera. To eject the SD card, push the SD card into the slot. D-Link DCS-7413 Quick Install Guide...
  • Page 4: Mounting Instructions

    4. Mounting Instructions Mounting Installation Please refer to the User Manual for detailed instructions regarding installation and mounting of the camera using a mounting bracket. Figure 2.1 Figure 2.2 Figure 2.3 Figure 2.4 D-Link DCS-7413 Quick Install Guide...
  • Page 5 Connection with a PoE switch If you are using a PoE switch, connect the IP camera to the switch via an Ethernet cable, which will provide transmission of both power and data over a single cable. D-Link DCS-7413 Quick Install Guide...
  • Page 6: Configuration With Wizard

    5. Configuration with Wizard Insert the DCS-7413 CD into your computer's CD-ROM drive to begin the installation. If the Autorun function on your computer is disabled, or if the D-Link Launcher fails to start automatically, click Start > Run. Type D:\autorun.exe, where D: represents the drive letter of your CD-ROM drive.
  • Page 7 Click on the D-Link Setup Wizard SE icon that was created in your Windows Start menu. Start > D-Link > Setup Wizard SE The Setup Wizard will appear and display the MAC address and IP address of your camera(s). If you have a DHCP server on your network, a valid IP Address will be displayed.
  • Page 8: Viewing Camera Via Web Browser

    Viewing Camera via Web Browser Click on the D-Link Setup Wizard SE icon that was created in your Windows Start menu. Start > D-Link > Setup Wizard SE Select the camera and click the button labeled "Link" to access the web configuration.
  • Page 9 Notes D-Link DCS-7413 Quick Install Guide...
  • Page 10 Notes D-Link DCS-7413 Quick Install Guide...
  • Page 11 Notes D-Link DCS-7413 Quick Install Guide...
  • Page 12: Technical Support

    Copyright ©2012 D-Link Corporation/D-Link Systems, Inc. All rights reserved. D-Link, and the D-Link logo are registered trademarks of D-Link Corporation or its subsidiaries in the United States and other countries. Other trademarks are the property of their respective owners. Product specifications, size and shape are subject to change without notice, and actual product appearance may differ from that depicted on the packaging.

Table of Contents