Subscribe to Our Youtube Channel
Related Manuals for Defy OGS148
Summary of Contents for Defy OGS148
-
Page 1: Table Of Contents
OWNER’S MANUAL PAGE / CONTENTS GAS STOVE 2 IMPORTANT INFORMATION OGS148 2 COMPLIANCE WITH LOCAL REQUIREMENTS 3 SERVICE INSTALLER DETAILS 3 INSTALLATION BEFORE USE 4 GAS CONNECTION 6 RELOCATING BURNER CAPS 6 KNOW YOUR STOVE 7 LIGHTING THE BURNERS 7 LIGHTING THE OVEN... -
Page 2: Important Information
IMPORTANT INFORMATION Important: Read these instructions for use carefully so as to familiarize yourself with the appliance before connecting it to its gas container. Keep these instructions for future reference. Do not use the stove if it is damaged. Report the damage to your dealer, who will take the necessary corrective action. -
Page 3: Installation Before Use
Before the installer hands over the appliance be sure that you fully understand: a) The position of the isolation or shut-off valve in the gas supply line to the appliance. b) The requirements for safe operation of the appliance. NOTE This appliance is supplied ex-factory with jets and air settings for use with Liquid Petroleum Gas ( LPG ) only. -
Page 4: Gas Connection
GAS CONNECTION GAS SUPPLY The stove has been designed to operate on Liquid Petroleum Gas. Connecting hardware, gas bottles, regulators and hoses are not supplied with the stove. These must be purchased and must comply with local by-laws. Installation using a 1/2" Flexible Pipe Pressure regulator Inlet to gas bottle. - Page 5 Leaking gas may also be identified by a characteristic smell. If a leak is detected, do not attempt to light a burner. Check and tighten all the connections once more. If a leak is still evident, turn the gas off and call the nearest Defy Service Centre for assistance.
-
Page 6: Relocating Burner Caps
RELOCATING THE BURNER CAPS CORRECTLY 1 & 2. Slot the burner body over the central burner tube on the stove. Gently lower the burner body into position. 3. Centralise and level the burner cap onto the burner body. (The burner cap must be positioned so that it rests centrally on the burner body). -
Page 7: Lighting The Burners
LIGHTING THE BURNERS Light the gas Adjust the flame to suit Turn the control Push the at the burner by turning the control knob anti-clockwise control knob in knob to the desired until gas flow position is detected TO TURN THE GAS OFF, TURN THE CONTROL KNOB TO THE OFF ( 0 ) POSITION. LIGHTING THE OVEN FOR ROASTING OR BAKING IMPORTANT: WHEN THE OVEN IS IN USE, THE HOB LID MUST BE IN THE OPEN POSITION... -
Page 8: Oven Control
THE OVEN CONTROL The oven control may be set to any of five heat levels to suit cooking require- ments. See guide below if temperature levels are not displayed on the control panel. HIGH = Approximately 290°C MEDIUM HIGH = Approximately 270°C MEDIUM = Approximately 250°C MEDIUM LOW... -
Page 9: Cleaning And Maintenance
This may be done using a Gas Jet Cleaning Kit which may be • purchased from your nearest Defy Service Centre. The kit comprises of a sliding T-bar (A) a socket (B) and a •... -
Page 10: Safety Precautions
If you have followed the instructions and still have a problem please contact the nearest DEFY SERVICE CENTRE. They are as close as your telephone and can help with the operation of your stove or send a qualified technician to repair it. -
Page 11: Service Centres
Defy Service Centre. Service Centres are located in Bloemfontein, Cape Town, Durban, East London, Johannesburg, Polokwane, Port Elizabeth and Pretoria. Other areas are serviced by over 200 authorised Service Agents. Consult your telephone directory for the nearest regional Defy Service Centre. NOTES... -
Page 12: Warranty
WARRANTY This certificate is issued by DEFY APPLIANCES (PTY) LIMITED Manufacturers of Defy and Ocean products, hereinafter the Company, to the original purchaser only, of the appliance described on the certificate and shall constitute the only warranty given in respect of this appliance.
Need help?
Do you have a question about the OGS148 and is the answer not in the manual?
Questions and answers