Connecting The Power Cord; Setup Tour - JVC AV-14F116 Service Manual

Preparation

4 Connecting the power cord

Connect the power cord to the AC outlet.
Operate only from the power source indicated on the rear of the TV.

5 SETUP TOUR

When the TV is first turned on it enters the SETUP TOUR mode, and the JVC logo is
displayed. Follow the instructions on the on-screen display to perform the SETUP TOUR.
• In case of resetting that the reason for such as removal, you can set the SETUP TOUR
function on the "MENU 3" menu. For details, see page 13.
1 Press the Main power button
on the TV.
The POWER lamp or POWER/ON
TIMER lamp lights. After the JVC
logo has been displayed, the TV
automatically switches to the
language setting mode.
2 Press the MENU M buttons to
select the on-screen language.
3 Press the MENU y button.
The AUTO PROGRAMMING function
will start and the indicator blinks.
• To stop the AUTO PROGRAMMING function, press the MENU m buttons.
When you press stop, it will display "SETUP TOUR THANK YOU!".
When all the TV channels that can be received on your TV have been preset, the
display goes out and the AUTO PROGRAMMING function operation is completed.
• If a TV channel you want to view is not set to the channel, set it with the MANUAL CH
6
PRESET function. For details, see page 14.
• Illustration of AV-14F116
ON TIMER POWER
POWER lamp
DISPLAY
button
MENU -/+
buttons
Main power button
MENU /
buttons