Web-Browser Interface Configuration; Ccessing To The Rm-911 Web-Browser; Network Setting - Inter-m ARM-911 Operation Manual

Web-browser Interface Configuration

Web-browser Interface Configuration

1. ccessing to the RM-911 Web-browser

Connecting the TCP/IP port to your computer. Change the IP address of the computer (ex. 192.168.1.100)
and change the Gateway to 192.168.1.99. ccess to the web-browser by typing in the address bar of your
internet browser such Explorer, Firefox or Safari the factory default IP address (192.168.1.99). If the IP
address of the RM-911 has been set to something different then use that address. You can reset the
RM-911 to factory default by pushing the RESET button for more than 5 second. The unit will be reset to
default mode.
When the web server is connected normally, user verification window will pop-up.
Type in the web ID and password as below.
USER ID: admin
Password: 1
If User ID and password are correct, then the browser should connect to Control Interface.

2. Network Setting

This page allows you to set-up the device Host Name as well as setting DHCP or fixed IP.
UTOM TED REMOTE MESS GE
RM-911
9