1 Wired Connection Connect the USB cable to the keyboard and your PC. If this is the first time connecting the keyboard, wait until the operating system displays a message that the keyboard is successfully installed. Note: Batteries are not required when the USB cable is used. 2 Toggle to Bluetooth Mode ®...
Page 3
3 Wireless Bluetooth Connection Press the Pairing Button at the bottom of the keyboard. The Bluetooth Indicator starts blinking blue. Note: ON/OFF switch is not active when USB cable is connected. 4 Pairing To pair to your desktop PCs: Windows®: From the Charms bar, click Settings , then click Change PC settings.
Page 4
Switching The Keyboard Between Devices To toggle the keyboard between the USB connected device and the Bluetooth connected device, press the Control and 1 keys. When the keyboard is switched to Bluetooth Mode, the Bluetooth Indicator will be solid blue. Using The Keyboard with Bluetooth Connection Only Install two AAA batteries as shown.
Technical Support Technical support is available to all registered users of Kensington products. Technical Support contact information can be found on the back page of this manual. Web Support You may find the answer to your problem in the Frequently Asked Questions (FAQ) section of the Support area on the Kensington Website: www.support.kensington.com.
Page 6
(2) This device must accept any interference received, including interference that may cause undesired operation. As defined in Section 2.909 of the FCC Rules, the responsible party for this device is Kensington Computer Product Group, 333 Twin Dolphin Drive, Redwood Shores, CA 94065, USA.
Need help?
Do you have a question about the KP400 and is the answer not in the manual?
Questions and answers
This is an old keyboard and I don't know the pin to connect to Bluetooth