Table of Contents
Advertisement
When you leave a service area, the phone displays
"Leaving Service Area" message.
4. Call Connect
(MENU
Alert sound to notify the user when the call is
connected.
Display
(MENU
)
Backlight
(MENU
Choose the settings of the LCD and keypad backlight.
"10 seconds" turns the backlight off 10 seconds after
the last key was pressed. "30 seconds" waits 30
seconds after the last key was pressed. "On when
Flip open" means that the backlight is always on while
flip is open. "Always on" means that the backlight is
on regardless of the flip's status. Choosing "Always
on" significantly decrease battery drain. "Always off"
means that the backlight is never on.
Banner
(MENU
)
Enter the banner (up to 16 characters) that is
displayed on the top line when the phone powers up
and when it is in standby mode. Press Soft Key 1
OPT
and press Soft Key 1
the [
] button, to make changes to the existing
banner. Enter the characters as you would when
storing a name tag to a memory location. Then
press Soft Key 1
SAVE
.
Theme
(MENU
)
You can set up the screen displayed on the LCD
screen in the standby mode.
3 4
)
)
SEL
select [Edit] using
Auto Hyphen
(MENU
Set hyphen option. When on, this automatically inserts
hyphens to be consistent with U.S. phone numbers.
Language
(MENU
Set the Multi-language feature for displaying each
language. Language support : English/Spanish.
System
(MENU
)
Version
(MENU
)
View the software and PRL version.
Call Information
(MENU
Last Call
(MENU
Displays duration of last call in minutes and
seconds.
Home Calls
(MENU
Displays the total number and time (minutes and
seconds) of all calls made while in the home system
(i.e. not roaming), since last reset. You can reset it
by pressing Soft Key 1
OPT
SEL
after select [Zero] using the [
Roam Calls
(MENU
Displays the total number and time (minutes and
seconds) of all calls made while in the roaming
mode.
)
)
)
)
)
and Press Soft Key 1
] button.
)
3 5
Advertisement
Table of Contents
