Table of Contents
Advertisement
3. SETTING METHOD
1.IF
[1. VCO] : It must not adjust without signal
(1) [1] key
Select 1.IF.
(2) [1] key
Select 1.VCO(CW).
Check the arrow position between the ABOVE REF. and BELOW REF.
(3) [DISPLAY] key
Return to the SERVICE MENU screen.
2.V/C, 3.AUDIO, 4.DEF, 5.VSM PRESET, 7.PIP AND 8.SURROUND.
(1) [2], [3], [4], [5], [7], [8] key
Select one from 2.V/C, 3.AUDIO, 4.DEF, 5.VSM PRESET, 7.PIP, 8.SURROUND.
(2) [MENU
/ ] key
Select setting items.
(3) [MENU
/ ] key
Set (adjust) the setting values of the setting items.
(4) MENU [OK] key
Memorize the setting value.
(Before storing the setting values in memory, do not press the CH, TV, POWER ON / OFF key. if you do, the values will not
be stored in memory.)
(5) [DISPLAY] key
Return to the SERVICE MENU screen.
6.STATUS, 9. SHIPPING(OFF) AND 0. BUS FREE.
It is not requirement to adjustment.
4. RELEASE OF SERVICE MENU
After completing the setting, return to the SERVICE MENU, then again press the [DISPLAY] key.
(No.52200)1-17
Advertisement
Table of Contents
