Audio Players; Cd/Dvd Player - GMC 2011 Full-Size Truck Navigation System User Manual

22 Infotainment System

Audio Players

CD/DVD Player

Playing an Audio CD
The player can be used for CD and
MP3. If your vehicle has RSE, the
player can be used for CD, MP3,
DVD audio, and as a DVD video
player. See Playing a DVD later in
this section.
With the ignition on, insert a CD
partway into the slot, label side up.
The player pulls it in and the CD
should begin playing. While playing
a CD, the navigation system is
available. If you insert a CD with
the system off and the ignition on,
it starts to play.
When you insert a CD, the CD tab
displays.
If you turn off the ignition or radio
with a CD in the player, it stays in
the player. When you turn on the
ignition or radio, the CD will start
playing where it stopped, if it was
the last selected audio source.
As each new track starts to play,
the track number appears on the
display.
The CD player can play the smaller
8cm (3 inch) single CDs with an
adapter ring. Full-size CDs and the
smaller CDs are loaded in the same
manner.
If an error appears on the display,
see CD/DVD Messages later in
this section.
If viewing a map screen, press the
CD screen button. The display splits
between the audio screen and the
map screen. If you do not want to
view a split screen or you are not
on a map screen, press the AUDIO
control button, then press it again
until CD is selected, or press the CD
screen button.
j
/ (Pause/Play):
1. Press to pause the CD.
This button will then change
to the play button.
2. Press the play button to play
the CD.