Flybox Power supply contents of the box familiarize yourself with your Flybox indicator status Flybox functions where should you locate your Flybox? installing your Flybox SIM card Phone adapter safety precautions Ethernet cable Phone cable...
Phone cable Signal strength indicator Solid blue light: connected to UMTS/HSDPA network Ethernet cable ON/OFF key Power/USB cable WLAN indicator When you start up your Flybox a green light will appear for 3 seconds. Pedestal Power indicator Network mode indicator...
Laptop(s) Ensure it is located near the power supply. your existing phone (WiFi connected) If your Flybox is located near your computer, it is best to use a wired network (Ethernet). Computer(s) (Ethernet) Do not plug anything in for the time being.
‘View available wireless networks’. plug your Flybox into the mains socket and plug in the telephone Plug the Flybox into the mains socket, then plug in your telephone as shown in the diagram. If you wish to set up a wired connection via Phone Ethernet, go to step 3.
Page 7
SIM card will be blocked after 3 wrong attempts.) – If a solid light appears on your signal strength indicator (6), your Flybox is operational. You now have access to broadband and telephony services from your living room or office.
Flybox safety precautions advanced users Do not switch on your device when its use is prohibited or when its use if you want to access advanced settings may cause interference or danger. – Log on to the admin interface.
Need help?
Do you have a question about the Flybox and is the answer not in the manual?
Questions and answers