Step3 Time Setting; Step4 Resolution Setting - Gi spark2 User Manual

2.3 Step3 time setting

Then press key then below screen appears:.
Saprk2 will start searching for an update. If a newer
version is available, will pup up below message.
After check update finish, time setting menu appears
automatically.
You can set the time Auto update by DVB or network
mode. Set the Auto update to OFF if you want to use a
certain fixed time. In this case, you need to enter correct
time in date and time field with number keys.
Select the desired time format and confirm with OK.
Select the correct GMT Offset according to your time
zone.

2.4 Step4 resolution setting

Then press key go to resolution setting.
Here you need select the desired resolution
depending on your HD TV Set and confirm with OK. If you
have a standard TV set, set the resolution at 576 or480.