Advertisement
~
iIII
ct
••
••
J
m
~o o"~
[II
\
"-
/
Right
r;d~
"-==l
t
"-==l
Left
~
~
•
p
8
-
...
et
-~
~
~
~
•
(anne
1. Connect the Satellites to the
L-SPK OUT and R-SPK OUT
ports of the Subwoofer.
2. Connect the plug of the wired Control Pod to the Control Pod port of the Subwoofer.
3. Plug the audio cable into the Line In port of the Subwoofer.
4. Plug the other end into your computer or other audio source.
5. Connect the power cable of the Subwoofer to a power supply.
Operation
e
1. Push the
Power
button on the wired Control Pod to turn on the computer speaker system.
The green light on the Control Pod comes on.
2. Make sure that your audio source is correctly configured.
3. Adjust the bass level with the Bass Control control located on the rear of the Subwoofer.
4. Adjust the volume level with the Volume control on the wired Control Pod.
You can now enjoy the sound ofyour computer speaker system.
5. You can connect an auxiliary audio source to the wired Control Pod.
The sound of the auxiliary audio source is sent
to
the computer speaker system.
You can also connect headphones to the wired Control Pod. The sound will be routed to your
headphones. Audio through the system will be muted while headphones are inserted.
Advertisement
