Scientific Atlanta Explorer 1850 User Manual page 5

8300 Back Panel Overview
1 Cable In
2 Cable Out
3 Audio Out (L and R)
4 Video Out
5 Digital Audio Output
6 Secondary Video
and Audio Out
7 S-Video Out
8 IR
9 SATA
10 AC Outlet
11 AC Power Input
Connect to the coaxial cable coming from the wall.
Connect a coaxial cable to Cable Out to send analog audio and video signals to a
TV or VCR. These signals are SDTV video and stereo audio.
Connect RCA cables to Audio Out to send analog audio signals (left and right) to a
stereo receiver or TV with stereo outputs.
Connect to video input of a TV or VCR.
Connect an RCA cable to send a digital audio signal to a surround-sound receiver
or other digital audio device.
Connect to either a VCR for archiving saved content from the 8300HD or to
another set of inputs (composite) on your HDTV.
Connect an S-Video cable to send an S-Video signal to your TV or VCR. This signal
is standard definition, but higher quality than other SDTV connections.
(This connector reserved for future use.)
Connect to an external Serial ATA (SATA) hard disk drive for expanded recording
capability. Please check with EATEL for a list of approved hard drive models for
use with the 8300.
Connect the AC power cord from another device, such as a TV.
Connect the STB to an AC electrical outlet using the cord provided.
Continued on Next Page
31