Sanyo PLV-Z2000 Service Manual page 86

Multimedia projector
Hide thumbs Also See for PLV-Z2000:
Table of Contents

Advertisement

Troubleshooting
From previous
page
No picture with Computer
(RGB analog) input source
No
No picture with Computer
(RGB SCART) input source
No
No picture with S-VIDEO
input source
No
No picture with VIDEO
input source
Yes
Check Computer source input stage;
Check IC301 and peripheral circuit.
Check sync signals <PC_V> and <PC_H>.
SG:
PC_RGB signals are sent to IC301.
Sync: PC_HS/VS signals are sent to IC301.
Yes
Check Computer source input stage;
Check RGB SCART signals at test points TPPC-R/G/B.
Check IC301 and peripheral circuit.
Check sync signals <ADHS> and <ADVS>.
SG:
RGB SCART signals are sent to IC301.
Sync: SCART_CV signal at 13 pin of D-sub_15 is sent to IC301.
Yes
Check AV source input stage;
Check Y/C signals at IIC301 and peripheral circuit.
SG:
Y signal and S_CHROMA signal are sent to IC301.
Sync: Y/C signals are sent to IC301.
Yes
Check AV source input stage;
Check IC301 and peripheral circuit.
SG:
Composite video signal is sent to IC301.
Sync: Composite video signal is sent to IC301.
-86-
-86-

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents