Mechanical disassemblies
9-
1 Lamp unit removal.
1. Loosen the 2 screws-A and remove the Lamp unit.
2. Remove the screw-B (T3x8) and remove the Main board holder.
9-
2 Lamp connector removal.
1. Remove the 2 screws(T3X6) and remove the Lamp connector.
Ballast Cable
Caution:
When remove the Lamp ballast cable,
be carefull not to damade the cable.
Main board holder
A
Lamp unit
Lamp connector
- 24 -
B