Advertisement
AccuTemp
TM
- Models DW760 & DW860 Only
If, for any reason, the incomingwater is below On - The On lightwill glow during all washes,
120°F, press the AccuTemp
TM
buttonto insure rinsesand the dryingperiod.
the water is heatedto the propertemperaturefor
best cleaningand drying results. If the water
Heating Delay -The HeatingDelay lightindicates
temperature is low, the main wash will be
the mainwashis beingextendedto heatthe water
extended and the Heating Delay indicator light
to the propertemperature.
will glow.
Press the Cancel buttonto cancel this option.
Clean (Models DW760 & DW860 only) - The
Clean light will glow after the drying period is
This option is not available in the Rinse & Hold completed as a reminderthat the dishes have
cycle,
gonethrougha washand dry cycle. It will remain
lit until the dial is manually turned to the Off
Heat Dry
position (vertical line after the dry section).
Selectthisoptionto provideheat forfasterdrying.
Delay Start (Model DW860 only) - The Delay
Fan Dry - Models DW710 & DW730 Only
Start light willglowduring the Delaytime period. It
Depressthisbutton toturnthe heatingelementoff willgo off whenthe dishwasherstarts.
duringthe fan dry cycle.
Cancel - Models DW760 & DW860 Only
Press the Cancel buttonto cancel the Heat Dry
For best cleaning,the forgotten item shouldbe
AND/OR theAccuTemp
TM
options.NOTE: If heat added early in the cycle.
dry has been cancelled, a fan will still operate
duringthe dry cycle.
1. Unlatchthe doorand wait untilthe soundof
circulatingwater stops.
Delay Start - Model DW860 Only
Select thisoption to delaystartthe dishwasher for
2. Open the door and add the item.
approximately1 - 6 hours.To select,turnthe Set
Dialto the desirednumberof hours.
3. Closethe doorand pause brieflybeforelatch-
ing the door. The cycle will continue at the
pointit was interrupted.
Note: Run the water from the hot water tap to
clear the line of cold water before starting the
dishwasher.
After loading, press the button for the desired
wash cycle (Heavy, Normal or Light). Pressthe
buttonforthedesiredoptions.Setthe dialtoStart.
Note DWT00 Owners: Turn the dial to desired
setting.
To selectRinse & Hold set the dial at the begin-
ningofthe Rinse&Holdsection.AccuTemp
TM
and
Heat Dry are notavailablewiththiscycle.
After selectingthe cycle and options press the
dooruntilit latches.The motorwillrunfora minute
ortwobeforethe dishwasherbeginsto fill.The On
indicatorwill light.
9
Advertisement
