Starting The Dishwasher - Maytag Jetclean 9962 Manual

Table of Contents

Advertisement

STARTING
THE
When the cycle is selected, the indicator on the pad will
DISHWASHER
light and a tone sounds. RINSE, 7."!P,_ and an estimated
After loading, close the door; press the door until the
cycle time appear in the display,
latd_ clicks.
HEATED
DRY improves dha;ingby adding heat to the
dry cycle. When selected, tbe indicator on the pad will
NOTE:
If your water heater is located a long dis-
light and HEATED DRY will appear in the displ W.
lance from the kiteheu, nm the water from the hot
water tap to clear the line of cold water before
If you choose not to use this option, press the HEAT-
ED DRY pad to turn the ligbt off and the dishes will be
starting.
fan dried only. Towel d_ng
of some items may be nec-
Turn the dishwasher on by firmly pressing the pad cor-
essary,
responding with the chosen cycle. Pressing Smart Start,
With either of these d_7 options you may notice moist
or an optional cycle (Saul Scrub, Quick Wash or Rinse
air being released from the dishwasher
througb the
& Hold) will start the dishwasher (fill will begin). The
vent located below the controls. You m W also notice
indicator light [br the selected cycle will gknv.
that some items with concave bottoms or Teflon-coat-
ings are difficult to dry and may need towel drying
Display
Window
before putting them away_
Through words, symbols and nmnbers the display win-
NOTE: For best drying results, use a rinse aid and
dow indicates what is happening in the dishwasher.
HEATED DRY and make sure the incoming water
Cycle
Progression:
temperature
is 120°-140°F.
The dishwasher will indicate the portion of the cycle it
is currently in. Estimated time remaining in the cycle
DELICATE
WASH call be used with any cycle,
(in minutes) also appears in the display.
inelnding Smart Start to create a gentle wash and dry,
cycle for china and eustal. Press the Delicate Wash pad
WASH
_
This symbol flashes to indicate the wash
after selecting a cycle. The indicator on the pad will
circulation has started. Soiled items can be added while
light and a tone will slmnd. DELICATE
WASH will
in this portion of the cycle.
light in tile display. Use half as much detergent as nor-
RINSE
.:':'iF:'7. This symbol flashes to indicate the rinse
really required,
circulation has started.
CANCEL
any cycle before it's finished by pressing this
DRY
IJJ,_'lJJJ The fan symbol will light during the d_
pad. The indicator on the pad will light and a tone will
period and the fan blades will flash when the fan is on.
sound. Tile dishwasher will drain, if needed, and shnt
The heat symbols will light when Heated Dry is select-
off.
ed. If the sensors indicate that additional
drying is
needed, the fan may run for a few minutes after the end
Child
Lock
of the cycle.
To prevent children from accidentally starting the dish-
washer or changing the cycle and options, press the
Special
Indicators:
padlock symbol t_ located next to the Smart Start pad 3
CLEAN - appears at the end of a complete wash cycle.
tinles within .3 seconds. LOCKED will appear in the
It will remain lit until the door has been opened con-
display. To cancel, again press the padlock .3times with-
tinuonsly for 60 seconds.
in .3seconds.
DELAY - appears when the Delay pad is pressed. The
]
I
time (in h°urs °r minutes) is als° dispIayed"
NOTE: This does not lock the door, only the eon-
trols.
DELICATE
WASH
appears when this option has
been chosen with any wash cycle,
HEATED DRY - appears if Heated DU is selected.
HEATING
- appears when the water temperature
is
low and tile beating element is on during washing or
rinsing portions of the cycle. It is NOT lit during the
drying portion of the cycle.
Page 8

Advertisement

Table of Contents
loading

Table of Contents