Meet Your Extender - NETGEAR N300 EX2700 User Manual

Meet Your Extender

LEDs are located on the front panel. Buttons are located on the side panel. The Factory
Reset button and an Ethernet port are located on the bottom.
Power LED
WPS LED
Power On/Off
button
WPS button
Factory Reset
button
Figure 1. Extender front panel
Table 1. LEDs
LED
Router Link LED
Device Link LED
Power LED
WPS LED
N300 WiFi Range Extender
Router Device
Link
Link
LED LED
Description
The connection between the extender and the router or access point:
• Solid green. Best connection.
• Solid amber. Good connection.
• Solid red. Poor connection.
• Off. No connection.
The connection between the extender and a computer or mobile device.
• Solid green. Best connection.
• Solid amber. Good connection.
• Solid red. Poor connection.
• Off. No connection.
• Solid amber. The extender is booting.
• Solid green. The extender is powered on.
• Off. The extender is powered off.
• Solid green. WiFi security is enabled (WPA or WPA2).
• Blinking green. A WPS connection is being established.
• Off. WiFi security is not enabled.
Get to Know Your Extender
Ethernet port
5