Advertisement
When powering up the amplifier, the setting of the volume knob will
be used as actual playback volume. (...usual potentiometer
operation) Once you have pressed the remote in either direction,
the IR-volume-indicator will light up. If the actual volume is higher
then indicated by the knob, the LED will be illuminated in yellow, if it
is lower, the LED will light up in green.
This way, you always know your area of operation. It is a good idea
to leave the volume knob at a comfortable default volume setting.
Now you definitively know if your actual volume is higher or lower
than the default setting.
Rotating the knob restores the potentiometer operation.
11
Advertisement
