Wolf WWD30 Use & Care Manual page 9

Warming Drawer Operation
Control Panel Backlighting
The Wolf warming drawer has three options for control
panel backlighting; backlight off in Sabbath, backlight on
in Sabbath and backlight off in all modes. The backlight
defaults to ON in normal use and OFF in Sabbath mode.
CHANGING BACKLIGHTING
1) Warming drawer must be OFF.
2) Touch and hold TEMP UP arrow and TIMER UP arrow
for 5 seconds. The current backlight setting will appear
in the display.
3) Use the TIMER UP arrow to scroll through the three
backlight options; backlight off in Sabbath, backlight
on in Sabbath (50% power), and backlight off in all
modes. A selection should be made within 30 seconds.
The unit will default to the current backlight setting if a
new selection is not made within this time.
4) With the desired backlight setting selected, touch
POWER ON/OFF to save the setting.
Temperature Scale
The warming drawer can be changed from Fahrenheit (°F)
temperature to Celsius (°C) or vice versa.
CHANGING TEMPERATURE SCALE
1) Warming drawer must be OFF.
2) Touch and hold both the TEMP UP and DOWN arrows
for 5 seconds.
3) After 5 seconds, a chime will sound, the backlighting
will turn on, and either F or C will appear, depending on
the current setting.
4) Touch the TEMP UP or DOWN arrow to select either
Fahrenheit (F) or Celsius (C).
5) With the desired temperature scale selected, touch
POWER ON/OFF to save the setting.
9
wolfappliance.com