Wolf WWD30 Use & Care Manual page 8

Warming drawers
Table of Contents

Advertisement

Warming Drawer Operation
Electronic Controls
PRESET PROGRAMMING
Preset temperatures and time settings can be adjusted for
the PROOF, LOW, MED and HIGH PRESETS.
The PROOF temperature range is 80–110°F (25–40°C).
The LOW, MED and HIGH PRESETS can be adjusted from
80–200°F (25–95°C).
ADJUSTING PRESET TEMPERATURE AND TIME
1) Warming drawer must be OFF.
2) Touch POWER ON/OFF.
3) Touch and hold the desired PRESET, PROOF, LOW,
MED or HIGH for 5 seconds. The word TIMER will illu-
minate and "4:00" will flash in the display along with
the temperature. Adjustments to the settings should be
made within 30 seconds. The unit will exit the preset
programming mode if no adjustment is made within
this time.
4) To adjust the temperature, touch and hold the TEMP
UP arrow to increase or the DOWN arrow to decrease
the temperature until the desired preset temperature is
shown in the display.
5) To adjust the time setting, touch and hold the TIMER
UP arrow to increase or the DOWN arrow to decrease
the time until the desired preset time setting is shown
in the display.
6) Touch and hold the adjusted PRESET again for 5
seconds. Three chimes will signify that settings for the
PRESET have been changed. If 30 seconds elapse
before you touch and hold the PRESET, the unit will
exit the preset programming mode with no adjustments
made.
Sabbath Mode
Sabbath mode is for certain religious observances where
some warming drawer functions need to be turned off. In
Sabbath mode, the automatic shut-off feature is disabled,
allowing the warming drawer to operate continuously.
SETTING SABBATH MODE
1) Warming drawer must be OFF.
2) Touch and hold POWER ON/OFF for 5 seconds. The
word "Sab" will flash in the display after 5 seconds.
3) While "Sab" is flashing, select one of the PRESETS or
set the temperature with the TEMP UP or DOWN arrow
pads. Touch the UP arrow to increase the temperature
and the DOWN arrow to decrease the temperature.
Two chimes will signify that the Sabbath mode has
been initiated.
4) In Sabbath mode, the warming drawer will operate
continuously until POWER ON/OFF is touched. The
word ON will remain illuminated in the display all the
while the unit is in Sabbath mode. No other read-outs
will appear in the display.
5) Touch POWER ON/OFF to shut off the warming drawer
and exit Sabbath mode.
When Sabbath mode is initiated, the automatic shut-off
is disabled, requiring the unit to be turned off manually
by touching POWER ON/OFF.
8

Advertisement

Table of Contents
loading

Table of Contents