Message Display - Harman Kardon DMC 1000 User Manual

MESSAGE DISPLAY

Source
Playback
Indicators
Mode
Message Area
NOTE: To make it easier to follow the instructions that refer to the controls and connectors in this illustration, a larger copy may be downloaded
from the Product Support section for this product at www.harmankardon.com.
Playback Mode: These indicators light to show the current playback mode:
›
Lights when content is playing in the Normal mode.
› ›
Lights in the Fast Search Forward and Slow Play modes, with
the speed shown briefly in an on-screen banner.
± Lights when the disc is paused.
‹ ‹
Lights when the disc is in the Fast Search Reverse mode, with
the speed shown briefly in an on-screen banner.
NOTE: Slow Play is not available for MP3 files.
Sources: One of these indicators will light to indicate the current media
source (DMC [the Media Library], DVD, VCD, USB 1 [front], USB 2 [back],
Card 1 [SD, MMC, Memory Stick, xD-Picture Card], Card 2 [CF], The
Bridge, AUX). During a recording, the source indicator will light.
12
Downloaded From Disc-Player.com Harman/Kardon Manuals
Video
Video Output Title
Off
Resolution
Network
Track/Chapter Audio
Video Output Resolution: Either the 480i or 480p indicator will light to
indicate whether the Component Video Outputs are in progressive scan
mode. When the Composite or S-Video Outputs are in use, this indicator
will always indicate the default 480i (interlaced scan) setting, even if you
attempt to change the Output Resolution setting in the Video Setup
menu to a higher video resolution.
When the HDMI Output is in use, its video resolution will be indicated.
NOTE: The 480i resolution is not available via the HDMI Output.
If the HDMI Output is connected simultaneously with the Composite
or S-Video Output, this indicator will reflect the HDMI Output's
resolution, and the signal at the Composite and S-Video Outputs
will remain at 480i.
Network: This indicator lights when the RJ45 jack is connected to
a live network.
Camera Angle
Random
Parental
Lock Repeat
Time